This is the latest recevied telemetry packets stored in our database for station/object MB7UE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1732291208 | 12.72 Volt | 40 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732290908 | 12.72 Volt | 40 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732290608 | 12.72 Volt | 40 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732290308 | 12.72 Volt | 40 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732290008 | 12.72 Volt | 40 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732289708 | 12.72 Volt | 40 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732289408 | 12.72 Volt | 40 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732289108 | 12.72 Volt | 40 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732288808 | 12.72 Volt | 40 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732288508 | 12.72 Volt | 40 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732288208 | 12.72 Volt | 10 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732287908 | 12.72 Volt | 0 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732287608 | 12.72 Volt | 0 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732287308 | 12.72 Volt | 0 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732287008 | 12.72 Volt | 0 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732286708 | 12.72 Volt | 0 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732286408 | 12.72 Volt | 0 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732286108 | 12.72 Volt | 0 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732285808 | 12.72 Volt | 0 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732285508 | 12.72 Volt | 0 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732285208 | 12.72 Volt | 0 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732284908 | 12.72 Volt | 0 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732284608 | 12.72 Volt | 0 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732284308 | 12.72 Volt | 0 Pkt | 0 Pkt | 39 Pcnt | 0 None |
| 1732284008 | 12.72 Volt | 0 Pkt | 0 Pkt | 39 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)