This is the latest recevied telemetry packets stored in our database for station/object BH9DX-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RF->INET* | INET->RF* | Repeater* | AllCount* | AllDrop* |
---|---|---|---|---|---|
1720301396 | 0 Pkts | 0 Pkts | 0 Pkts | 39 Pkts | 0 Pkts |
1720300796 | 0 Pkts | 0 Pkts | 0 Pkts | 67 Pkts | 0 Pkts |
1720300196 | 0 Pkts | 0 Pkts | 0 Pkts | 61 Pkts | 0 Pkts |
1720299596 | 0 Pkts | 0 Pkts | 0 Pkts | 44 Pkts | 0 Pkts |
1720298996 | 0 Pkts | 0 Pkts | 0 Pkts | 58 Pkts | 0 Pkts |
1720298396 | 0 Pkts | 0 Pkts | 0 Pkts | 63 Pkts | 0 Pkts |
1720297796 | 0 Pkts | 0 Pkts | 0 Pkts | 50 Pkts | 0 Pkts |
1720297196 | 0 Pkts | 0 Pkts | 0 Pkts | 76 Pkts | 0 Pkts |
1720296596 | 0 Pkts | 0 Pkts | 0 Pkts | 64 Pkts | 0 Pkts |
1720295996 | 0 Pkts | 0 Pkts | 0 Pkts | 56 Pkts | 0 Pkts |
1720295396 | 0 Pkts | 0 Pkts | 0 Pkts | 52 Pkts | 0 Pkts |
1720294796 | 0 Pkts | 0 Pkts | 0 Pkts | 60 Pkts | 0 Pkts |
1720294196 | 0 Pkts | 0 Pkts | 0 Pkts | 46 Pkts | 0 Pkts |
1720293596 | 0 Pkts | 0 Pkts | 0 Pkts | 82 Pkts | 0 Pkts |
1720292996 | 0 Pkts | 0 Pkts | 0 Pkts | 63 Pkts | 0 Pkts |
1720292396 | 0 Pkts | 0 Pkts | 0 Pkts | 44 Pkts | 0 Pkts |
1720291796 | 0 Pkts | 0 Pkts | 0 Pkts | 63 Pkts | 0 Pkts |
1720291196 | 0 Pkts | 0 Pkts | 0 Pkts | 66 Pkts | 0 Pkts |
1720290596 | 0 Pkts | 0 Pkts | 0 Pkts | 49 Pkts | 0 Pkts |
1720289996 | 0 Pkts | 0 Pkts | 0 Pkts | 77 Pkts | 0 Pkts |
1720289396 | 0 Pkts | 0 Pkts | 0 Pkts | 71 Pkts | 0 Pkts |
1720288796 | 0 Pkts | 0 Pkts | 0 Pkts | 59 Pkts | 0 Pkts |
1720288196 | 0 Pkts | 0 Pkts | 0 Pkts | 62 Pkts | 0 Pkts |
1720287596 | 0 Pkts | 0 Pkts | 0 Pkts | 72 Pkts | 0 Pkts |
1720286996 | 0 Pkts | 0 Pkts | 0 Pkts | 50 Pkts | 0 Pkts |
*Used Equation Coefficients:
RF->INET: 0, 1, 0
INET->RF: 0, 1, 0
Repeater: 0, 1, 0
AllCount: 0, 1, 0
AllDrop: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)