This is the latest recevied telemetry packets stored in our database for station/object OE3VPA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
---|---|---|---|---|---|
1719658604 | 13.11 Volt | 680 pkt | 0 Pkt | 71 Pcnt | 0 None |
1719658303 | 13.04 Volt | 700 pkt | 0 Pkt | 72 Pcnt | 0 None |
1719658003 | 13.04 Volt | 690 pkt | 0 Pkt | 72 Pcnt | 0 None |
1719657703 | 13.11 Volt | 680 pkt | 0 Pkt | 71 Pcnt | 0 None |
1719657402 | 13.11 Volt | 660 pkt | 0 Pkt | 70 Pcnt | 0 None |
1719657102 | 13.04 Volt | 640 pkt | 0 Pkt | 70 Pcnt | 0 None |
1719656802 | 13.04 Volt | 620 pkt | 0 Pkt | 70 Pcnt | 0 None |
1719656502 | 13.11 Volt | 610 pkt | 0 Pkt | 70 Pcnt | 0 None |
1719656201 | 13.11 Volt | 600 pkt | 0 Pkt | 69 Pcnt | 0 None |
1719655901 | 13.11 Volt | 600 pkt | 0 Pkt | 70 Pcnt | 0 None |
1719655601 | 13.11 Volt | 600 pkt | 0 Pkt | 69 Pcnt | 0 None |
1719655300 | 13.19 Volt | 620 pkt | 0 Pkt | 70 Pcnt | 0 None |
1719655000 | 13.11 Volt | 640 pkt | 0 Pkt | 70 Pcnt | 0 None |
1719654700 | 13.19 Volt | 660 pkt | 0 Pkt | 70 Pcnt | 0 None |
1719654399 | 13.27 Volt | 660 pkt | 0 Pkt | 68 Pcnt | 0 None |
1719654099 | 13.43 Volt | 670 pkt | 0 Pkt | 69 Pcnt | 0 None |
1719653799 | 13.51 Volt | 670 pkt | 0 Pkt | 70 Pcnt | 0 None |
1719653499 | 13.51 Volt | 670 pkt | 0 Pkt | 69 Pcnt | 0 None |
1719653198 | 13.67 Volt | 680 pkt | 0 Pkt | 69 Pcnt | 0 None |
1719652898 | 13.75 Volt | 680 pkt | 0 Pkt | 69 Pcnt | 0 None |
1719652598 | 13.75 Volt | 660 pkt | 0 Pkt | 69 Pcnt | 0 None |
1719652297 | 13.75 Volt | 650 pkt | 0 Pkt | 68 Pcnt | 0 None |
1719651997 | 13.67 Volt | 630 pkt | 0 Pkt | 69 Pcnt | 0 None |
1719651697 | 13.67 Volt | 600 pkt | 0 Pkt | 68 Pcnt | 0 None |
1719651397 | 13.67 Volt | 590 pkt | 0 Pkt | 67 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)