This is the latest recevied telemetry packets stored in our database for station/object TA2KJ-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
|---|---|---|---|---|---|
| 1758196637 | 3 Pkt | 21 Pkt | 0 Pkt | -61 dBm | 0 V |
| 1758195695 | 2 Pkt | 12 Pkt | 0 Pkt | -61 dBm | 0 V |
| 1758194760 | 5 Pkt | 25 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1758193807 | 2 Pkt | 34 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1758192849 | 4 Pkt | 10 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1758191917 | 3 Pkt | 13 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1758190984 | 4 Pkt | 21 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1758190041 | 4 Pkt | 4 Pkt | 0 Pkt | -61 dBm | 0 V |
| 1758189113 | 6 Pkt | 12 Pkt | 0 Pkt | -61 dBm | 0 V |
| 1758188178 | 3 Pkt | 13 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1758187244 | 5 Pkt | 6 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1758186314 | 5 Pkt | 26 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1758185369 | 1 Pkt | 2 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1758184674 | 4 Pkt | 8 Pkt | 0 Pkt | -61 dBm | 0 V |
| 1758183741 | 5 Pkt | 18 Pkt | 0 Pkt | -61 dBm | 0 V |
| 1758182802 | 5 Pkt | 22 Pkt | 0 Pkt | -63 dBm | 0 V |
| 1758181859 | 5 Pkt | 17 Pkt | 0 Pkt | -63 dBm | 0 V |
| 1758180922 | 5 Pkt | 4 Pkt | 0 Pkt | -63 dBm | 0 V |
| 1758180922 | 5 Pkt | 4 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1758179994 | 4 Pkt | 7 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1758179064 | 6 Pkt | 3 Pkt | 0 Pkt | -61 dBm | 0 V |
| 1758178137 | 4 Pkt | 12 Pkt | 0 Pkt | -61 dBm | 0 V |
| 1758177204 | 4 Pkt | 6 Pkt | 0 Pkt | -61 dBm | 0 V |
| 1758176275 | 4 Pkt | 16 Pkt | 0 Pkt | -62 dBm | 0 V |
| 1758175337 | 4 Pkt | 11 Pkt | 0 Pkt | -62 dBm | 0 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)