This is the latest recevied telemetry packets stored in our database for station/object E20ZNR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1739740824 | 15 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
| 1739739899 | 19 Pkt | 0 Pkt | 0 Pkt | -83 dBm | 0 % |
| 1739738974 | 17 Pkt | 1 Pkt | 0 Pkt | -86 dBm | 0 % |
| 1739738049 | 18 Pkt | 1 Pkt | 1 Pkt | -81 dBm | 0 % |
| 1739737125 | 14 Pkt | 0 Pkt | 0 Pkt | -83 dBm | 0 % |
| 1739736200 | 18 Pkt | 1 Pkt | 1 Pkt | -81 dBm | 0 % |
| 1739735274 | 17 Pkt | 0 Pkt | 0 Pkt | -83 dBm | 0 % |
| 1739734350 | 20 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 0 % |
| 1739733425 | 12 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 0 % |
| 1739732500 | 15 Pkt | 0 Pkt | 0 Pkt | -82 dBm | 0 % |
| 1739731575 | 18 Pkt | 1 Pkt | 1 Pkt | -82 dBm | 0 % |
| 1739730649 | 21 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1739729725 | 18 Pkt | 0 Pkt | 0 Pkt | -85 dBm | 0 % |
| 1739728801 | 20 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 0 % |
| 1739727875 | 20 Pkt | 0 Pkt | 0 Pkt | -87 dBm | 0 % |
| 1739726950 | 19 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 0 % |
| 1739726026 | 18 Pkt | 0 Pkt | 2 Pkt | -84 dBm | 0 % |
| 1739725101 | 22 Pkt | 1 Pkt | 1 Pkt | -81 dBm | 0 % |
| 1739724176 | 21 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1739723250 | 14 Pkt | 0 Pkt | 0 Pkt | -85 dBm | 0 % |
| 1739722326 | 16 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 0 % |
| 1739721401 | 25 Pkt | 1 Pkt | 0 Pkt | -85 dBm | 0 % |
| 1739720476 | 22 Pkt | 1 Pkt | 0 Pkt | -86 dBm | 0 % |
| 1739719550 | 21 Pkt | 1 Pkt | 0 Pkt | -80 dBm | 0 % |
| 1739718625 | 13 Pkt | 4 Pkt | 5 Pkt | -84 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)