APRS Track Direct

My position About ☰

reset

9M4GKJ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M4GKJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1732287687	40 Pkt	1 Pkt	2 Pkt	-66 dBm	9.86 V
1732286760	54 Pkt	3 Pkt	5 Pkt	-63 dBm	9.93 V
1732285832	59 Pkt	0 Pkt	4 Pkt	-62 dBm	9.86 V
1732284905	18 Pkt	5 Pkt	1 Pkt	-68 dBm	9.88 V
1732283979	17 Pkt	0 Pkt	2 Pkt	-65 dBm	9.88 V
1732283053	19 Pkt	1 Pkt	5 Pkt	-63 dBm	9.88 V
1732282128	21 Pkt	2 Pkt	3 Pkt	-63 dBm	9.86 V
1732281202	46 Pkt	0 Pkt	3 Pkt	-66 dBm	9.91 V
1732280274	21 Pkt	0 Pkt	1 Pkt	-68 dBm	9.86 V
1732279349	42 Pkt	0 Pkt	4 Pkt	-67 dBm	9.91 V
1732278423	40 Pkt	0 Pkt	5 Pkt	-67 dBm	9.88 V
1732277496	8 Pkt	0 Pkt	4 Pkt	-66 dBm	9.88 V
1732276571	9 Pkt	0 Pkt	5 Pkt	-65 dBm	9.95 V
1732275646	10 Pkt	0 Pkt	3 Pkt	-68 dBm	9.91 V
1732274721	21 Pkt	0 Pkt	4 Pkt	-68 dBm	9.86 V
1732273796	0 Pkt	0 Pkt	0 Pkt	-66 dBm	9.91 V
1732272708	6 Pkt	0 Pkt	4 Pkt	-62 dBm	9.91 V
1732271783	11 Pkt	0 Pkt	4 Pkt	-66 dBm	9.88 V
1732270859	6 Pkt	0 Pkt	2 Pkt	-63 dBm	9.91 V
1732269934	20 Pkt	0 Pkt	1 Pkt	-68 dBm	9.91 V
1732269010	21 Pkt	0 Pkt	4 Pkt	-69 dBm	9.86 V
1732268084	29 Pkt	0 Pkt	6 Pkt	-64 dBm	9.88 V
1732267157	46 Pkt	0 Pkt	3 Pkt	-68 dBm	9.95 V
1732266231	10 Pkt	0 Pkt	4 Pkt	-68 dBm	9.91 V
1732265306	15 Pkt	0 Pkt	1 Pkt	-68 dBm	9.93 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)