This is the latest recevied telemetry packets stored in our database for station/object LU1HOU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
|---|---|---|---|---|---|
| 1732289063 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 12.16 V |
| 1732288741 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 12.16 V |
| 1732288420 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 12.14 V |
| 1732288097 | 0 Pkt | 0 Pkt | 0 Pkt | -48 dBm | 12.12 V |
| 1732287776 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 12.16 V |
| 1732287453 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 12.14 V |
| 1732287131 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 12.14 V |
| 1732286809 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 12.16 V |
| 1732286487 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 12.16 V |
| 1732286165 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 12.16 V |
| 1732285843 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 12.12 V |
| 1732285521 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 12.18 V |
| 1732285199 | 0 Pkt | 0 Pkt | 0 Pkt | -48 dBm | 12.18 V |
| 1732284877 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 12.16 V |
| 1732284555 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 12.18 V |
| 1732284233 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 12.16 V |
| 1732283911 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 12.14 V |
| 1732283589 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 12.18 V |
| 1732283267 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 12.16 V |
| 1732282945 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 12.16 V |
| 1732282624 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 12.14 V |
| 1732282301 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 12.12 V |
| 1732281979 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 12.14 V |
| 1732281657 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 12.16 V |
| 1732281335 | 0 Pkt | 0 Pkt | 0 Pkt | -51 dBm | 12.14 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)