This is the latest recevied telemetry packets stored in our database for station/object 9M2EDK-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732292475 | 0.02 | 0.03 | 20 | 0 | 19 |
| 1732289110 | 0.04 | 0.03 | 28 | 4 | 22 |
| 1732287843 | 0.02 | 0.02 | 15 | 6 | 12 |
| 1732286643 | 0.02 | 0.01 | 13 | 5 | 10 |
| 1732285443 | 0.03 | 0.02 | 19 | 5 | 16 |
| 1732281205 | 0.03 | 0.03 | 23 | 3 | 21 |
| 1732280005 | 0.03 | 0.03 | 27 | 0 | 25 |
| 1732278805 | 5.7 | 6.1 | 22 | 0 | 23 |
| 1732277605 | 7 | 6.2 | 29 | 0 | 26 |
| 1732276405 | 4.9 | 5.6 | 26 | 1 | 24 |
| 1732275205 | 8.4 | 7.3 | 25 | 0 | 23 |
| 1732274005 | 5.6 | 5.3 | 28 | 0 | 22 |
| 1732270867 | 7.9 | 6.8 | 34 | 3 | 25 |
| 1732268986 | 6.6 | 6.9 | 29 | 2 | 26 |
| 1732267786 | 6.5 | 6.1 | 24 | 2 | 22 |
| 1732265249 | 6.6 | 4.2 | 21 | 5 | 15 |
| 1732264049 | 4.7 | 4.3 | 18 | 2 | 16 |
| 1732262849 | 5 | 6.1 | 24 | 1 | 24 |
| 1732261649 | 4.5 | 4 | 20 | 4 | 17 |
| 1732260383 | 5.6 | 4.2 | 19 | 8 | 15 |
| 1732247870 | 4.6 | 5 | 21 | 0 | 18 |
| 1732244904 | 8.9 | 7.6 | 37 | 0 | 30 |
| 1732243706 | - | - | - | - | - |
| 1732243704 | 5 | 7.1 | 14 | 1 | 20 |
*Used Equation Coefficients:
Value1: 0, 0.005, 0
Value2: 0, 0.005, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)