APRS Track Direct

My position About ☰

reset

OE3RNB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3RNB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	EffTo*
1758191816	13.75 Volt	540 Pkt	81 Pcnt	80 None
1758191516	13.75 Volt	580 Pkt	81 Pcnt	80 None
1758191215	13.75 Volt	590 Pkt	80 Pcnt	80 None
1758190915	13.75 Volt	610 Pkt	80 Pcnt	80 None
1758190615	13.75 Volt	640 Pkt	79 Pcnt	80 None
1758190316	13.67 Volt	660 Pkt	78 Pcnt	80 None
1758190314	13.67 Volt	660 Pkt	78 Pcnt	80 None
1758190014	13.75 Volt	700 Pkt	78 Pcnt	80 None
1758189714	13.67 Volt	740 Pkt	78 Pcnt	80 None
1758189414	13.67 Volt	760 Pkt	78 Pcnt	80 None
1758189113	13.75 Volt	780 Pkt	79 Pcnt	80 None
1758188813	13.75 Volt	810 Pkt	79 Pcnt	80 None
1758188513	13.75 Volt	830 Pkt	78 Pcnt	80 None
1758188212	13.75 Volt	840 Pkt	78 Pcnt	80 None
1758187912	13.75 Volt	830 Pkt	78 Pcnt	80 None
1758187612	13.75 Volt	830 Pkt	78 Pcnt	80 None
1758187312	13.75 Volt	820 Pkt	78 Pcnt	80 None
1758187011	13.75 Volt	800 Pkt	78 Pcnt	80 None
1758186711	13.75 Volt	780 Pkt	79 Pcnt	80 None
1758186411	13.67 Volt	770 Pkt	78 Pcnt	80 None
1758186110	13.67 Volt	740 Pkt	78 Pcnt	80 None
1758185810	13.75 Volt	710 Pkt	79 Pcnt	80 None
1758185510	13.67 Volt	710 Pkt	79 Pcnt	80 None
1758185210	13.75 Volt	670 Pkt	78 Pcnt	80 None
1758184909	13.75 Volt	650 Pkt	79 Pcnt	80 None

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EffTo: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)