This is the latest recevied telemetry packets stored in our database for station/object IR2CI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732552420 | 15 | 6 | 2 | 15560 | 53 |
| 1732552120 | 12 | 7 | 1 | 15561 | 53 |
| 1732551820 | 9 | 8 | 2 | 15560 | 53 |
| 1732551520 | 11 | 9 | 3 | 15561 | 53 |
| 1732551220 | 6 | 9 | 0 | 15560 | 53 |
| 1732550920 | 6 | 10 | 0 | 15560 | 53 |
| 1732550620 | 5 | 11 | 0 | 15560 | 53 |
| 1732550321 | 6 | 11 | 0 | 15561 | 53 |
| 1732550020 | 11 | 11 | 0 | 15561 | 53 |
| 1732549721 | 15 | 10 | 1 | 15562 | 53 |
| 1732549421 | 11 | 10 | 1 | 15563 | 53 |
| 1732549121 | 15 | 9 | 8 | 15563 | 53 |
| 1732548821 | 29 | 9 | 17 | 15563 | 53 |
| 1732548521 | 30 | 8 | 15 | 15558 | 53 |
| 1732548221 | 24 | 6 | 14 | 15553 | 53 |
| 1732547921 | 22 | 5 | 15 | 15549 | 53 |
| 1732547621 | 20 | 4 | 6 | 15544 | 53 |
| 1732547321 | 14 | 4 | 0 | 15540 | 53 |
| 1732547021 | 5 | 4 | 0 | 15541 | 53 |
| 1732546721 | 2 | 5 | 0 | 15542 | 53 |
| 1732546421 | 3 | 6 | 0 | 15542 | 53 |
| 1732546121 | 6 | 7 | 0 | 15542 | 53 |
| 1732545821 | 4 | 6 | 0 | 15542 | 53 |
| 1732545521 | 4 | 7 | 0 | 15543 | 53 |
| 1732545221 | 3 | 7 | 0 | 15543 | 53 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)