APRS Track Direct

My position About ☰

reset

HA5SZI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HA5SZI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RF->INET*	INET->RF*	Repeater*	AllCount*	AllDrop*
1732290491	0 Pkts	0 Pkts	0 Pkts	129 Pkts	0 Pkts
1732289891	0 Pkts	0 Pkts	0 Pkts	187 Pkts	0 Pkts
1732289291	0 Pkts	0 Pkts	0 Pkts	5 Pkts	0 Pkts
1732288675	0 Pkts	0 Pkts	0 Pkts	126 Pkts	0 Pkts
1732288075	0 Pkts	0 Pkts	0 Pkts	2 Pkts	0 Pkts
1732287459	0 Pkts	0 Pkts	0 Pkts	174 Pkts	0 Pkts
1732285011	0 Pkts	0 Pkts	0 Pkts	5 Pkts	0 Pkts
1732284395	0 Pkts	0 Pkts	0 Pkts	178 Pkts	0 Pkts
1732283795	0 Pkts	0 Pkts	0 Pkts	96 Pkts	0 Pkts
1732283195	0 Pkts	0 Pkts	0 Pkts	116 Pkts	0 Pkts
1732282595	0 Pkts	0 Pkts	0 Pkts	3 Pkts	0 Pkts
1732281979	0 Pkts	0 Pkts	0 Pkts	75 Pkts	0 Pkts
1732281379	0 Pkts	0 Pkts	0 Pkts	120 Pkts	0 Pkts
1732280779	0 Pkts	0 Pkts	0 Pkts	5 Pkts	0 Pkts
1732280163	0 Pkts	0 Pkts	0 Pkts	90 Pkts	0 Pkts
1732279563	0 Pkts	0 Pkts	0 Pkts	105 Pkts	0 Pkts
1732278963	0 Pkts	0 Pkts	0 Pkts	113 Pkts	0 Pkts
1732278363	0 Pkts	0 Pkts	0 Pkts	1 Pkts	0 Pkts
1732277747	0 Pkts	0 Pkts	0 Pkts	121 Pkts	0 Pkts
1732275915	0 Pkts	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1732275299	0 Pkts	0 Pkts	0 Pkts	97 Pkts	0 Pkts
1732274699	0 Pkts	0 Pkts	0 Pkts	59 Pkts	0 Pkts
1732274099	0 Pkts	0 Pkts	0 Pkts	105 Pkts	0 Pkts
1732273499	0 Pkts	0 Pkts	0 Pkts	97 Pkts	0 Pkts
1732272899	0 Pkts	0 Pkts	0 Pkts	67 Pkts	0 Pkts

*Used Equation Coefficients:

RF->INET: 0, 1, 0

INET->RF: 0, 1, 0

Repeater: 0, 1, 0

AllCount: 0, 1, 0

AllDrop: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)