This is the latest recevied telemetry packets stored in our database for station/object OK1PNK-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732276180 | 5 | 5 | 42 | 1 | 53.33 |
| 1732274378 | 4 | 4 | 42 | 95 | 53.33 |
| 1732273477 | 3 | 3 | 42 | 94 | 53.33 |
| 1732272576 | 44 | 44 | 9 | 93 | 53.33 |
| 1732271675 | 7 | 7 | 0 | 92 | 53.33 |
| 1732270774 | 16 | 16 | 11 | 91 | 53.33 |
| 1732269874 | 6 | 6 | 42 | 90 | 45 |
| 1732268973 | 5 | 5 | 42 | 89 | 53.33 |
| 1732268073 | 16 | 16 | 11 | 88 | 53.33 |
| 1732267170 | 2 | 2 | 5 | 87 | 53.33 |
| 1732266269 | 5 | 5 | 42 | 86 | 53.33 |
| 1732265369 | 5 | 5 | 42 | 85 | 53.33 |
| 1732264467 | 6 | 6 | 42 | 84 | 53.33 |
| 1732263566 | 5 | 5 | 42 | 83 | 53.33 |
| 1732262665 | 4 | 4 | 42 | 82 | 53.33 |
| 1732261765 | 5 | 5 | 42 | 81 | 53.33 |
| 1732260863 | 6 | 6 | 42 | 80 | 53.33 |
| 1732259962 | 5 | 5 | 42 | 79 | 53.33 |
| 1732259061 | 5 | 5 | 42 | 78 | 53.33 |
| 1732258161 | 4 | 4 | 42 | 77 | 53.33 |
| 1732257260 | 5 | 5 | 42 | 76 | 53.33 |
| 1732256358 | 28 | 28 | 42 | 75 | 53.33 |
| 1732255457 | 32 | 32 | 42 | 74 | 53.33 |
| 1732254556 | 5 | 5 | 42 | 73 | 53.33 |
| 1732253656 | 5 | 5 | 42 | 72 | 53.33 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)