APRS Track Direct

My position About ☰

reset

LZ0PTN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ0PTN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	EffTo*	Eff1h*
1732308366	13.88 Volt	180 Pkt	60 Pcnt	65 Pcnt
1732307766	13.88 Volt	190 Pkt	60 Pcnt	64 Pcnt
1732307166	13.88 Volt	200 Pkt	60 Pcnt	66 Pcnt
1732306566	13.88 Volt	190 Pkt	60 Pcnt	65 Pcnt
1732305966	13.88 Volt	190 Pkt	60 Pcnt	64 Pcnt
1732305366	13.88 Volt	200 Pkt	60 Pcnt	65 Pcnt
1732304766	13.88 Volt	160 Pkt	59 Pcnt	61 Pcnt
1732304166	13.88 Volt	160 Pkt	59 Pcnt	61 Pcnt
1732303566	13.88 Volt	140 Pkt	59 Pcnt	59 Pcnt
1732302966	13.88 Volt	130 Pkt	58 Pcnt	57 Pcnt
1732302366	13.88 Volt	130 Pkt	58 Pcnt	57 Pcnt
1732301766	13.88 Volt	120 Pkt	58 Pcnt	53 Pcnt
1732301166	13.88 Volt	120 Pkt	58 Pcnt	51 Pcnt
1732300566	13.88 Volt	120 Pkt	59 Pcnt	54 Pcnt
1732299966	13.88 Volt	120 Pkt	59 Pcnt	53 Pcnt
1732299366	13.88 Volt	120 Pkt	59 Pcnt	53 Pcnt
1732298766	13.88 Volt	120 Pkt	59 Pcnt	55 Pcnt
1732298166	13.88 Volt	120 Pkt	60 Pcnt	57 Pcnt
1732297566	13.88 Volt	120 Pkt	61 Pcnt	62 Pcnt
1732296966	13.88 Volt	140 Pkt	61 Pcnt	65 Pcnt
1732296366	13.88 Volt	170 Pkt	61 Pcnt	66 Pcnt
1732295766	13.88 Volt	170 Pkt	61 Pcnt	64 Pcnt
1732295166	13.88 Volt	190 Pkt	61 Pcnt	64 Pcnt
1732294566	13.88 Volt	180 Pkt	62 Pcnt	64 Pcnt
1732293966	13.88 Volt	170 Pkt	61 Pcnt	61 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

EffTo: 0, 1, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)