APRS Track Direct

My position About ☰

reset

IR2CI Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2CI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1732292036	27 Pkt	160 Pkt	2 Pkt	15.09 Pcnt	52 Pcnt
1732291736	23 Pkt	150 Pkt	0 Pkt	15.09 Pcnt	52 Pcnt
1732291436	20 Pkt	150 Pkt	0 Pkt	15.1 Pcnt	52 Pcnt
1732291136	21 Pkt	150 Pkt	0 Pkt	15.1 Pcnt	52 Pcnt
1732290836	14 Pkt	140 Pkt	0 Pkt	15.1 Pcnt	52 Pcnt
1732290536	9 Pkt	150 Pkt	1 Pkt	15.1 Pcnt	52 Pcnt
1732290236	9 Pkt	150 Pkt	1 Pkt	15.1 Pcnt	52 Pcnt
1732289936	26 Pkt	150 Pkt	14 Pkt	15.1 Pcnt	52 Pcnt
1732289636	36 Pkt	150 Pkt	11 Pkt	15.1 Pcnt	52 Pcnt
1732289336	38 Pkt	130 Pkt	7 Pkt	15.09 Pcnt	52 Pcnt
1732289036	35 Pkt	120 Pkt	8 Pkt	15.09 Pcnt	52 Pcnt
1732288736	31 Pkt	110 Pkt	5 Pkt	15.09 Pcnt	52 Pcnt
1732288436	18 Pkt	110 Pkt	1 Pkt	15.09 Pcnt	52 Pcnt
1732288136	23 Pkt	110 Pkt	1 Pkt	15.09 Pcnt	52 Pcnt
1732287836	20 Pkt	110 Pkt	2 Pkt	15.09 Pcnt	52 Pcnt
1732287536	19 Pkt	100 Pkt	1 Pkt	15.09 Pcnt	52 Pcnt
1732287236	11 Pkt	90 Pkt	0 Pkt	15.09 Pcnt	52 Pcnt
1732286936	12 Pkt	90 Pkt	0 Pkt	15.09 Pcnt	52 Pcnt
1732286636	9 Pkt	90 Pkt	0 Pkt	15.1 Pcnt	52 Pcnt
1732286336	9 Pkt	80 Pkt	0 Pkt	15.1 Pcnt	52 Pcnt
1732286036	14 Pkt	90 Pkt	0 Pkt	15.1 Pcnt	52 Pcnt
1732285736	20 Pkt	80 Pkt	0 Pkt	15.1 Pcnt	52 Pcnt
1732285436	25 Pkt	80 Pkt	0 Pkt	15.1 Pcnt	52 Pcnt
1732285136	25 Pkt	70 Pkt	1 Pkt	15.1 Pcnt	52 Pcnt
1732284836	16 Pkt	60 Pkt	1 Pkt	15.1 Pcnt	52 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)