This is the latest recevied telemetry packets stored in our database for station/object DL3DCW. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Leistung* | Ladezustand* | Bezugspreis* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1739740566 | 0 kW | 21 % | 37.7 ct/kWh | 0 | 0 |
| 1739740396 | 0 kW | 21 % | 37.7 ct/kWh | 0 | 0 |
| 1739739966 | 0 kW | 22 % | 37.7 ct/kWh | 0 | 0 |
| 1739739796 | 0 kW | 22 % | 37.7 ct/kWh | 0 | 0 |
| 1739739366 | 0 kW | 23 % | 37.9 ct/kWh | 0 | 0 |
| 1739739196 | 0 kW | 23 % | 37.9 ct/kWh | 0 | 0 |
| 1739738766 | 0 kW | 24 % | 37.9 ct/kWh | 0 | 0 |
| 1739738596 | 0 kW | 24 % | 37.9 ct/kWh | 0 | 0 |
| 1739738166 | 0 kW | 25 % | 37.9 ct/kWh | 0 | 0 |
| 1739737996 | 0 kW | 26 % | 37.9 ct/kWh | 0 | 0 |
| 1739737566 | 0 kW | 27 % | 37.9 ct/kWh | 0 | 0 |
| 1739737396 | 0 kW | 27 % | 37.9 ct/kWh | 0 | 0 |
| 1739736966 | 0 kW | 28 % | 37.9 ct/kWh | 0 | 0 |
| 1739736796 | 0 kW | 28 % | 37.9 ct/kWh | 0 | 0 |
| 1739736366 | 0 kW | 29 % | 37.9 ct/kWh | 0 | 0 |
| 1739736196 | 0 kW | 30 % | 37.9 ct/kWh | 0 | 0 |
| 1739735766 | 0 kW | 32 % | 39.6 ct/kWh | 0 | 0 |
| 1739735596 | 0 kW | 32 % | 39.6 ct/kWh | 0 | 0 |
| 1739735166 | 0 kW | 34 % | 39.6 ct/kWh | 0 | 0 |
| 1739734996 | 0 kW | 35 % | 39.6 ct/kWh | 0 | 0 |
| 1739734566 | 0 kW | 36 % | 39.6 ct/kWh | 0 | 0 |
| 1739734396 | 0 kW | 37 % | 39.6 ct/kWh | 0 | 0 |
| 1739733966 | 0 kW | 38 % | 39.6 ct/kWh | 0 | 0 |
| 1739733796 | 0 kW | 39 % | 39.6 ct/kWh | 0 | 0 |
| 1739733366 | 0 kW | 41 % | 39.6 ct/kWh | 0 | 0 |
*Used Equation Coefficients:
Leistung: 0, 0.1, 0
Ladezustand: 0, 1, 0
Bezugspreis: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)