This is the latest recevied telemetry packets stored in our database for station/object MAGMTN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732307146 | 13.98 Volts | 104 deg.F | 0 | 0 | 0 |
| 1732305889 | 14 Volts | 103 deg.F | 0 | 0 | 0 |
| 1732304768 | 14 Volts | 103 deg.F | 0 | 0 | 0 |
| 1732303585 | 14.02 Volts | 103 deg.F | 0 | 0 | 0 |
| 1732302530 | 14 Volts | 100 deg.F | 0 | 0 | 0 |
| 1732301275 | 14 Volts | 99 deg.F | 0 | 0 | 0 |
| 1732300201 | 14.02 Volts | 99 deg.F | 0 | 0 | 0 |
| 1732299179 | 14.02 Volts | 98 deg.F | 0 | 0 | 0 |
| 1732297990 | 14.02 Volts | 98 deg.F | 0 | 0 | 0 |
| 1732296865 | 14.02 Volts | 96 deg.F | 0 | 0 | 0 |
| 1732295813 | 14.02 Volts | 93 deg.F | 0 | 0 | 0 |
| 1732294765 | 14.02 Volts | 92 deg.F | 0 | 0 | 0 |
| 1732293722 | 14.65 Volts | 91 deg.F | 0 | 0 | 0 |
| 1732292540 | 14.67 Volts | 89 deg.F | 0 | 0 | 0 |
| 1732291470 | 14.67 Volts | 87 deg.F | 0 | 0 | 0 |
| 1732290463 | 14.67 Volts | 85 deg.F | 0 | 0 | 0 |
| 1732289357 | 14.67 Volts | 85 deg.F | 0 | 0 | 0 |
| 1732288255 | 14.1 Volts | 82 deg.F | 0 | 0 | 0 |
| 1732287182 | 13.76 Volts | 84 deg.F | 0 | 0 | 0 |
| 1732286157 | 13.13 Volts | 83 deg.F | 0 | 0 | 0 |
| 1732284913 | 12.56 Volts | 82 deg.F | 0 | 0 | 0 |
| 1732283743 | 12.54 Volts | 82 deg.F | 0 | 0 | 0 |
| 1732282680 | 12.54 Volts | 82 deg.F | 0 | 0 | 0 |
| 1732281647 | 12.54 Volts | 82 deg.F | 0 | 0 | 0 |
| 1732280470 | 12.58 Volts | 84 deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 0, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)