This is the latest recevied telemetry packets stored in our database for station/object DG1FDV-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750282674 | 6.14 VDC | 0 | 0 | 0 | 0 |
| 1750281774 | 6.15 VDC | 0 | 0 | 0 | 0 |
| 1750280874 | 6.16 VDC | 0 | 0 | 0 | 0 |
| 1750279974 | 6.13 VDC | 0 | 0 | 0 | 0 |
| 1750279074 | 6.14 VDC | 0 | 0 | 0 | 0 |
| 1750278174 | 6.14 VDC | 0 | 0 | 0 | 0 |
| 1750277274 | 6.15 VDC | 0 | 0 | 0 | 0 |
| 1750276374 | 6.16 VDC | 0 | 0 | 0 | 0 |
| 1750275473 | 6.15 VDC | 0 | 0 | 0 | 0 |
| 1750274573 | 6.13 VDC | 0 | 0 | 0 | 0 |
| 1750273673 | 6.16 VDC | 0 | 0 | 0 | 0 |
| 1750272773 | 6.16 VDC | 0 | 0 | 0 | 0 |
| 1750271873 | 6.14 VDC | 0 | 0 | 0 | 0 |
| 1750270973 | 6.13 VDC | 0 | 0 | 0 | 0 |
| 1750270073 | 6.16 VDC | 0 | 0 | 0 | 0 |
| 1750269173 | 6.15 VDC | 0 | 0 | 0 | 0 |
| 1750268273 | 6.15 VDC | 0 | 0 | 0 | 0 |
| 1750267373 | 6.15 VDC | 0 | 0 | 0 | 0 |
| 1750266472 | 6.15 VDC | 0 | 0 | 0 | 0 |
| 1750265572 | 6.14 VDC | 0 | 0 | 0 | 0 |
| 1750264672 | 6.14 VDC | 0 | 0 | 0 | 0 |
| 1750263772 | 6.14 VDC | 0 | 0 | 0 | 0 |
| 1750262872 | 6.14 VDC | 0 | 0 | 0 | 0 |
| 1750261972 | 6.14 VDC | 0 | 0 | 0 | 0 |
| 1750261072 | 6.14 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)