APRS Track Direct

My position About ☰

reset

W1DMR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W1DMR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Rx10m*
1749329421	14.25 Volt	1180 Pkt	63 Pcnt	217 Pkt
1749329121	14.25 Volt	1150 Pkt	62 Pcnt	194 Pkt
1749328821	14.25 Volt	1120 Pkt	61 Pcnt	174 Pkt
1749328521	14.25 Volt	1110 Pkt	61 Pcnt	173 Pkt
1749328221	14.25 Volt	1090 Pkt	61 Pcnt	161 Pkt
1749327921	14.25 Volt	1090 Pkt	61 Pcnt	173 Pkt
1749327621	14.25 Volt	1080 Pkt	62 Pcnt	173 Pkt
1749327321	14.25 Volt	1100 Pkt	62 Pcnt	172 Pkt
1749327021	14.25 Volt	1120 Pkt	63 Pcnt	186 Pkt
1749326721	14.25 Volt	1110 Pkt	63 Pcnt	184 Pkt
1749326421	14.25 Volt	1120 Pkt	63 Pcnt	171 Pkt
1749326121	14.25 Volt	1120 Pkt	63 Pcnt	168 Pkt
1749325821	14.25 Volt	1130 Pkt	64 Pcnt	165 Pkt
1749325521	14.25 Volt	1170 Pkt	64 Pcnt	162 Pkt
1749325221	14.25 Volt	1200 Pkt	65 Pcnt	139 Pkt
1749324921	14.25 Volt	1250 Pkt	67 Pcnt	156 Pkt
1749324621	14.25 Volt	1270 Pkt	67 Pcnt	164 Pkt
1749324321	14.25 Volt	1310 Pkt	67 Pcnt	178 Pkt
1749324021	14.25 Volt	1350 Pkt	68 Pcnt	204 Pkt
1749323721	14.25 Volt	1370 Pkt	68 Pcnt	178 Pkt
1749323421	14.25 Volt	1370 Pkt	68 Pcnt	182 Pkt
1749323121	14.25 Volt	1410 Pkt	67 Pcnt	183 Pkt
1749322821	14.25 Volt	1410 Pkt	68 Pcnt	191 Pkt
1749322521	14.25 Volt	1420 Pkt	67 Pcnt	208 Pkt
1749322221	14.25 Volt	1410 Pkt	67 Pcnt	233 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Rx10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)