APRS Track Direct

My position About ☰

reset

KF8I-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KF8I-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732286858	13.8 Volt	240 Pkt	0 Pkt	72 Pcnt
1732285178	13.8 Volt	260 Pkt	0 Pkt	76 Pcnt
1732283498	13.8 Volt	280 Pkt	10 Pkt	78 Pcnt
1732281818	13.8 Volt	270 Pkt	10 Pkt	78 Pcnt
1732280138	13.8 Volt	290 Pkt	0 Pkt	77 Pcnt
1732278458	13.8 Volt	310 Pkt	10 Pkt	76 Pcnt
1732276778	13.8 Volt	270 Pkt	10 Pkt	77 Pcnt
1732275098	13.8 Volt	230 Pkt	0 Pkt	78 Pcnt
1732273418	13.8 Volt	220 Pkt	0 Pkt	76 Pcnt
1732271738	13.8 Volt	210 Pkt	0 Pkt	75 Pcnt
1732270058	13.8 Volt	190 Pkt	0 Pkt	77 Pcnt
1732268378	13.8 Volt	190 Pkt	0 Pkt	74 Pcnt
1732266698	13.8 Volt	220 Pkt	0 Pkt	77 Pcnt
1732265018	13.8 Volt	230 Pkt	0 Pkt	80 Pcnt
1732263338	13.8 Volt	240 Pkt	0 Pkt	81 Pcnt
1732261658	13.8 Volt	250 Pkt	0 Pkt	83 Pcnt
1732259978	13.8 Volt	170 Pkt	0 Pkt	63 Pcnt
1732258298	13.8 Volt	80 Pkt	0 Pkt	38 Pcnt
1732256618	13.8 Volt	100 Pkt	0 Pkt	47 Pcnt
1732254938	13.8 Volt	180 Pkt	0 Pkt	68 Pcnt
1732253258	13.8 Volt	260 Pkt	0 Pkt	80 Pcnt
1732251578	13.8 Volt	260 Pkt	0 Pkt	75 Pcnt
1732249898	13.8 Volt	250 Pkt	0 Pkt	71 Pcnt
1732248218	13.8 Volt	250 Pkt	0 Pkt	74 Pcnt
1732246538	13.8 Volt	250 Pkt	0 Pkt	78 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)