This is the latest recevied telemetry packets stored in our database for station/object YB0ARY-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RSSI* | VBAT* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782529388 | -59 dbm | 3.03 V | 0 | 0 | 0 |
| 1782529088 | -58 dbm | 3.03 V | 0 | 0 | 0 |
| 1782528788 | -59 dbm | 3.03 V | 0 | 0 | 0 |
| 1782528487 | -59 dbm | 3.03 V | 0 | 0 | 0 |
| 1782528188 | -59 dbm | 3.03 V | 0 | 0 | 0 |
| 1782527887 | -60 dbm | 3.03 V | 0 | 0 | 0 |
| 1782527588 | -60 dbm | 3.03 V | 0 | 0 | 0 |
| 1782527288 | -59 dbm | 3.03 V | 0 | 0 | 0 |
| 1782526988 | -60 dbm | 3.03 V | 0 | 0 | 0 |
| 1782526687 | -59 dbm | 3.03 V | 0 | 0 | 0 |
| 1782526388 | -59 dbm | 3.03 V | 0 | 0 | 0 |
| 1782526087 | -58 dbm | 3.03 V | 0 | 0 | 0 |
| 1782525788 | -58 dbm | 3.03 V | 0 | 0 | 0 |
| 1782525488 | -57 dbm | 3.03 V | 0 | 0 | 0 |
| 1782525188 | -59 dbm | 3.03 V | 0 | 0 | 0 |
| 1782524887 | -59 dbm | 3.03 V | 0 | 0 | 0 |
| 1782524588 | -59 dbm | 3.03 V | 0 | 0 | 0 |
| 1782524287 | -58 dbm | 3.03 V | 0 | 0 | 0 |
| 1782523988 | -59 dbm | 3.03 V | 0 | 0 | 0 |
| 1782523687 | -58 dbm | 3.03 V | 0 | 0 | 0 |
| 1782523388 | -59 dbm | 3.03 V | 0 | 0 | 0 |
| 1782523087 | -58 dbm | 3.03 V | 0 | 0 | 0 |
| 1782522788 | -59 dbm | 3.03 V | 0 | 0 | 0 |
| 1782522488 | -59 dbm | 3.03 V | 0 | 0 | 0 |
| 1782522188 | -59 dbm | 3.03 V | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
VBAT: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)