APRS Track Direct

My position About ☰

reset

BM2OBM-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BM2OBM-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	CPUTemp*	RxPkts/20m*	RxPkts/1h*	RxPkts/24h*	DiGi*
1732291886	52 C	17 p	63 p	3412 p	1685 p
1732290686	53 C	18 p	96 p	3410 p	1674 p
1732289486	54 C	28 p	133 p	3412 p	1662 p
1732288285	54 C	50 p	165 p	3403 p	1645 p
1732287085	54 C	55 p	168 p	3373 p	1602 p
1732285885	54 C	60 p	165 p	3337 p	1554 p
1732284685	55 C	53 p	147 p	3294 p	1509 p
1732283485	55 C	52 p	118 p	3258 p	1463 p
1732282286	55 C	42 p	84 p	3230 p	1422 p
1732281086	55 C	24 p	69 p	3204 p	1386 p
1732279885	55 C	18 p	78 p	3228 p	1369 p
1732278687	55 C	27 p	75 p	3228 p	1358 p
1732277486	56 C	33 p	67 p	3220 p	1345 p
1732276285	56 C	15 p	59 p	3203 p	1336 p
1732275086	55 C	19 p	100 p	3211 p	1326 p
1732273886	57 C	25 p	116 p	3219 p	1316 p
1732272685	57 C	56 p	138 p	3214 p	1299 p
1732271486	57 C	35 p	131 p	3187 p	1255 p
1732270286	57 C	47 p	159 p	3183 p	1231 p
1732269086	57 C	49 p	180 p	3243 p	1194 p
1732267885	58 C	63 p	205 p	3334 p	1165 p
1732266685	58 C	68 p	267 p	3366 p	1126 p
1732265486	59 C	74 p	332 p	3393 p	1083 p
1732264286	60 C	126 p	363 p	3429 p	1036 p
1732263087	59 C	133 p	324 p	3375 p	963 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/20m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)