This is the latest recevied telemetry packets stored in our database for station/object DO6GZ-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774130421 | 4.35 V | 24 | 0 | 0 | 0 |
| 1774130304 | 3.45 V | 28 | 0 | 0 | 0 |
| 1774130073 | 4.37 V | 24 | 0 | 0 | 0 |
| 1774127498 | 3.49 V | 31 | 0 | 0 | 0 |
| 1774123599 | 3.67 V | 30 | 0 | 0 | 0 |
| 1774122205 | 3.59 V | 26 | 0 | 0 | 0 |
| 1774116872 | 3.46 V | 29 | 0 | 0 | 0 |
| 1774116765 | 4.11 V | 29 | 0 | 0 | 0 |
| 1774116532 | 4.18 V | 29 | 0 | 0 | 0 |
| 1774115722 | 3.5 V | 24 | 0 | 0 | 0 |
| 1774115252 | 3.39 V | 33 | 0 | 0 | 0 |
| 1774115028 | 3.43 V | 32 | 0 | 0 | 0 |
| 1774113523 | 3.77 V | 32 | 0 | 0 | 0 |
| 1774112821 | 3.5 V | 35 | 0 | 0 | 0 |
| 1774112474 | 4.37 V | 36 | 0 | 0 | 0 |
| 1774112358 | 4.02 V | 35 | 0 | 0 | 0 |
| 1774112242 | 3.63 V | 35 | 0 | 0 | 0 |
| 1774112127 | 4.44 V | 36 | 0 | 0 | 0 |
| 1774112011 | 3.86 V | 37 | 0 | 0 | 0 |
| 1774111895 | 4.15 V | 39 | 0 | 0 | 0 |
| 1774111779 | 3.84 V | 39 | 0 | 0 | 0 |
| 1774111664 | 4.28 V | 37 | 0 | 0 | 0 |
| 1774111548 | 3.78 V | 39 | 0 | 0 | 0 |
| 1774111432 | 3.45 V | 38 | 0 | 0 | 0 |
| 1774111316 | 3.46 V | 39 | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0.01
Satellite: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)