This is the latest recevied telemetry packets stored in our database for station/object IU4DKT-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10m* | Rx1h* | Dg10m* | DgR* | Eff1h* |
|---|---|---|---|---|---|
| 1732287811 | 60 Pkt | 370 Pkt | 6 Pkt | 0.55 Pcnt | 45 Pcnt |
| 1732287511 | 66 Pkt | 370 Pkt | 7 Pkt | 0.54 Pcnt | 46 Pcnt |
| 1732287211 | 69 Pkt | 350 Pkt | 4 Pkt | 0.54 Pcnt | 45 Pcnt |
| 1732286911 | 67 Pkt | 330 Pkt | 2 Pkt | 0.54 Pcnt | 46 Pcnt |
| 1732286611 | 57 Pkt | 310 Pkt | 1 Pkt | 0.54 Pcnt | 46 Pcnt |
| 1732286311 | 49 Pkt | 300 Pkt | 0 Pkt | 0.53 Pcnt | 45 Pcnt |
| 1732286011 | 46 Pkt | 300 Pkt | 0 Pkt | 0.53 Pcnt | 46 Pcnt |
| 1732285711 | 52 Pkt | 340 Pkt | 0 Pkt | 0.54 Pcnt | 48 Pcnt |
| 1732285411 | 54 Pkt | 350 Pkt | 0 Pkt | 0.54 Pcnt | 49 Pcnt |
| 1732285111 | 59 Pkt | 360 Pkt | 0 Pkt | 0.54 Pcnt | 51 Pcnt |
| 1732284811 | 60 Pkt | 360 Pkt | 2 Pkt | 0.54 Pcnt | 52 Pcnt |
| 1732284511 | 49 Pkt | 340 Pkt | 2 Pkt | 0.54 Pcnt | 52 Pcnt |
| 1732284211 | 35 Pkt | 340 Pkt | 2 Pkt | 0.53 Pcnt | 52 Pcnt |
| 1732283911 | 37 Pkt | 340 Pkt | 1 Pkt | 0.53 Pcnt | 53 Pcnt |
| 1732283611 | 35 Pkt | 340 Pkt | 0 Pkt | 0.53 Pcnt | 53 Pcnt |
| 1732283311 | 31 Pkt | 340 Pkt | 0 Pkt | 0.53 Pcnt | 53 Pcnt |
| 1732283011 | 55 Pkt | 340 Pkt | 0 Pkt | 0.53 Pcnt | 52 Pcnt |
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
DgR: 0, 0.001, 0
Eff1h: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)