APRS Track Direct

My position About ☰

reset

XE2CT-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2CT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	TEMP*
1744173860	12.3 Volt	50 Pkt	40 Pkt	75 Pcnt	20.5 C
1744173560	12.3 Volt	50 Pkt	40 Pkt	77 Pcnt	20.5 C
1744173260	12.3 Volt	70 Pkt	60 Pkt	79 Pcnt	20.5 C
1744172960	12.3 Volt	90 Pkt	70 Pkt	81 Pcnt	21 C
1744172660	12.23 Volt	90 Pkt	70 Pkt	80 Pcnt	20.5 C
1744172360	12.23 Volt	90 Pkt	70 Pkt	78 Pcnt	20.5 C
1744172060	12.23 Volt	90 Pkt	70 Pkt	77 Pcnt	21 C
1744171760	12.23 Volt	90 Pkt	70 Pkt	78 Pcnt	21 C
1744171460	12.23 Volt	90 Pkt	70 Pkt	78 Pcnt	21 C
1744171160	12.23 Volt	80 Pkt	60 Pkt	78 Pcnt	21 C
1744170860	12.23 Volt	60 Pkt	50 Pkt	80 Pcnt	21.5 C
1744170560	12.23 Volt	50 Pkt	40 Pkt	80 Pcnt	21.5 C
1744170260	12.23 Volt	50 Pkt	40 Pkt	80 Pcnt	21 C
1744169960	12.23 Volt	40 Pkt	30 Pkt	78 Pcnt	21 C
1744169660	12.23 Volt	20 Pkt	20 Pkt	75 Pcnt	21.5 C
1744169360	12.23 Volt	10 Pkt	10 Pkt	68 Pcnt	21.5 C
1744169060	12.23 Volt	10 Pkt	10 Pkt	70 Pcnt	21.5 C
1744168760	12.23 Volt	40 Pkt	30 Pkt	72 Pcnt	21.5 C
1744168460	12.23 Volt	60 Pkt	50 Pkt	74 Pcnt	21.5 C
1744168160	12.23 Volt	80 Pkt	60 Pkt	74 Pcnt	21.5 C
1744167860	12.23 Volt	110 Pkt	80 Pkt	76 Pcnt	22 C
1744167560	12.23 Volt	110 Pkt	90 Pkt	76 Pcnt	22 C
1744167260	12.23 Volt	110 Pkt	90 Pkt	76 Pcnt	22 C
1744166960	12.23 Volt	110 Pkt	90 Pkt	77 Pcnt	22 C
1744166660	12.23 Volt	110 Pkt	90 Pkt	76 Pcnt	22 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

TEMP: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)