This is the latest recevied telemetry packets stored in our database for station/object KD0IOE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Avg 10m* | Avg 10m* | RxPkts* | IGateDropRx* | TxPkts* |
---|---|---|---|---|---|
1719426153 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719424953 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719423753 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719422553 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719421353 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719420153 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719418953 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719417753 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719416553 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719415353 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719414153 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719412953 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719411753 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719410553 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719409353 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719408153 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719406953 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719405753 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719404553 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719403353 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719402153 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719400953 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719399753 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719398553 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719397353 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
*Used Equation Coefficients:
Avg 10m: 0, 0.005, 0
Avg 10m: 0, 0.005, 0
RxPkts: 0, 1, 0
IGateDropRx: 0, 1, 0
TxPkts: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)