This is the latest recevied telemetry packets stored in our database for station/object VA3APW-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1744133042 | 13.13 Volt | 20 Pkt | 0 Pkt | 59 Pcnt | 110 None |
| 1744132742 | 13.13 Volt | 20 Pkt | 0 Pkt | 68 Pcnt | 80 None |
| 1744132442 | 13.13 Volt | 20 Pkt | 0 Pkt | 64 Pcnt | 40 None |
| 1744132142 | 13.13 Volt | 10 Pkt | 0 Pkt | 62 Pcnt | 20 None |
| 1744131842 | 13.13 Volt | 10 Pkt | 0 Pkt | 55 Pcnt | 0 None |
| 1744131542 | 13.13 Volt | 10 Pkt | 0 Pkt | 57 Pcnt | 10 None |
| 1744131242 | 13.13 Volt | 10 Pkt | 0 Pkt | 54 Pcnt | 30 None |
| 1744130942 | 13.13 Volt | 10 Pkt | 0 Pkt | 51 Pcnt | 10 None |
| 1744130642 | 13.13 Volt | 10 Pkt | 0 Pkt | 51 Pcnt | 20 None |
| 1744130342 | 13.13 Volt | 10 Pkt | 0 Pkt | 54 Pcnt | 60 None |
| 1744130042 | 13.13 Volt | 10 Pkt | 0 Pkt | 52 Pcnt | 40 None |
| 1744129742 | 13.13 Volt | 20 Pkt | 0 Pkt | 55 Pcnt | 50 None |
| 1744129442 | 13.13 Volt | 10 Pkt | 0 Pkt | 55 Pcnt | 50 None |
| 1744129142 | 13.13 Volt | 20 Pkt | 0 Pkt | 58 Pcnt | 10 None |
| 1744128842 | 13.13 Volt | 20 Pkt | 0 Pkt | 58 Pcnt | 0 None |
| 1744128542 | 13.13 Volt | 20 Pkt | 0 Pkt | 63 Pcnt | 30 None |
| 1744128242 | 13.13 Volt | 20 Pkt | 0 Pkt | 67 Pcnt | 20 None |
| 1744127942 | 13.13 Volt | 20 Pkt | 0 Pkt | 64 Pcnt | 0 None |
| 1744127642 | 13.13 Volt | 20 Pkt | 0 Pkt | 68 Pcnt | 20 None |
| 1744127342 | 13.13 Volt | 20 Pkt | 0 Pkt | 72 Pcnt | 10 None |
| 1744127042 | 13.13 Volt | 20 Pkt | 0 Pkt | 70 Pcnt | 40 None |
| 1744126742 | 13.13 Volt | 20 Pkt | 0 Pkt | 70 Pcnt | 80 None |
| 1744126442 | 13.13 Volt | 20 Pkt | 0 Pkt | 68 Pcnt | 30 None |
| 1744126142 | 13.13 Volt | 20 Pkt | 0 Pkt | 66 Pcnt | 90 None |
| 1744125842 | 13.13 Volt | 20 Pkt | 0 Pkt | 62 Pcnt | 100 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 10, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)