This is the latest recevied telemetry packets stored in our database for station/object DO9KJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Rx1h* | De1h* | Eff1h* | Value4* | Value5* |
---|---|---|---|---|---|
1719426831 | 2.84 Pkt | 860 Pkt | 810 Pkt | 0 | 0 |
1719426531 | 3 Pkt | 860 Pkt | 810 Pkt | 0 | 0 |
1719426231 | 3.16 Pkt | 860 Pkt | 810 Pkt | 0 | 0 |
1719425931 | 3 Pkt | 850 Pkt | 810 Pkt | 0 | 0 |
1719425631 | 2.84 Pkt | 850 Pkt | 810 Pkt | 0 | 0 |
1719425331 | 2.84 Pkt | 850 Pkt | 810 Pkt | 0 | 0 |
1719425031 | 2.69 Pkt | 860 Pkt | 810 Pkt | 0 | 0 |
1719424731 | 2.53 Pkt | 870 Pkt | 810 Pkt | 0 | 0 |
1719424431 | 2.45 Pkt | 860 Pkt | 810 Pkt | 0 | 0 |
1719424131 | 2.37 Pkt | 860 Pkt | 810 Pkt | 0 | 0 |
1719423831 | 2.29 Pkt | 850 Pkt | 810 Pkt | 0 | 0 |
1719423531 | 2.21 Pkt | 840 Pkt | 810 Pkt | 0 | 0 |
1719423231 | 2.13 Pkt | 840 Pkt | 810 Pkt | 0 | 0 |
1719422931 | 2.05 Pkt | 840 Pkt | 810 Pkt | 0 | 0 |
1719422631 | 2.05 Pkt | 850 Pkt | 810 Pkt | 0 | 0 |
1719422331 | 1.98 Pkt | 850 Pkt | 810 Pkt | 0 | 0 |
1719422031 | 1.9 Pkt | 860 Pkt | 810 Pkt | 0 | 0 |
1719421732 | 1.82 Pkt | 860 Pkt | 810 Pkt | 0 | 0 |
1719421431 | 1.82 Pkt | 860 Pkt | 810 Pkt | 0 | 0 |
1719421131 | 1.74 Pkt | 860 Pkt | 810 Pkt | 0 | 0 |
1719420831 | 2.21 Pkt | 840 Pkt | 810 Pkt | 0 | 0 |
1719420531 | 2.53 Pkt | 840 Pkt | 810 Pkt | 0 | 0 |
1719420232 | 3.08 Pkt | 830 Pkt | 810 Pkt | 0 | 0 |
1719419931 | 3.56 Pkt | 830 Pkt | 810 Pkt | 0 | 0 |
1719419632 | 3.71 Pkt | 820 Pkt | 810 Pkt | 0 | 0 |
*Used Equation Coefficients:
Rx1h: 0, 0.079, 0
De1h: 0, 10, 0
Eff1h: 0, 10, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)