APRS Track Direct

My position About ☰

reset

LZ0PTN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ0PTN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	EffTo*	Eff1h*
1836274267	13.88 Volt	140 Pkt	60 Pcnt	58 Pcnt
1836274117	13.88 Volt	130 Pkt	60 Pcnt	56 Pcnt
1770136063	13.88 Volt	80 Pkt	43 Pcnt	47 Pcnt
1770135463	13.88 Volt	70 Pkt	42 Pcnt	45 Pcnt
1770134863	13.88 Volt	70 Pkt	42 Pcnt	49 Pcnt
1770134263	13.88 Volt	70 Pkt	42 Pcnt	45 Pcnt
1770133663	13.88 Volt	70 Pkt	42 Pcnt	46 Pcnt
1770133063	13.88 Volt	60 Pkt	42 Pcnt	46 Pcnt
1770132463	13.88 Volt	60 Pkt	42 Pcnt	44 Pcnt
1770131863	13.88 Volt	50 Pkt	42 Pcnt	41 Pcnt
1770131263	13.88 Volt	50 Pkt	42 Pcnt	42 Pcnt
1770130663	13.88 Volt	60 Pkt	42 Pcnt	46 Pcnt
1770130063	13.88 Volt	60 Pkt	42 Pcnt	46 Pcnt
1770129463	13.88 Volt	60 Pkt	42 Pcnt	45 Pcnt
1770128863	13.88 Volt	60 Pkt	42 Pcnt	47 Pcnt
1770128263	13.88 Volt	60 Pkt	42 Pcnt	49 Pcnt
1770127663	13.88 Volt	50 Pkt	42 Pcnt	44 Pcnt
1770127063	13.88 Volt	50 Pkt	41 Pcnt	42 Pcnt
1770126463	13.88 Volt	50 Pkt	41 Pcnt	41 Pcnt
1770125863	13.88 Volt	50 Pkt	41 Pcnt	41 Pcnt
1770125263	13.88 Volt	50 Pkt	41 Pcnt	42 Pcnt
1770124663	13.88 Volt	50 Pkt	41 Pcnt	41 Pcnt
1770124063	13.88 Volt	50 Pkt	41 Pcnt	42 Pcnt
1770123463	13.88 Volt	40 Pkt	41 Pcnt	41 Pcnt
1770122863	13.88 Volt	40 Pkt	42 Pcnt	44 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

EffTo: 0, 1, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)