APRS Track Direct

My position About ☰

reset

OE3XIR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3XIR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Eff1h*	DecEf*
1744793396	14.18 Volt	440 Pkt	58 Pcnt	65 Pcnt
1744793097	14.18 Volt	450 Pkt	58 Pcnt	65 Pcnt
1744793096	14.18 Volt	450 Pkt	58 Pcnt	65 Pcnt
1744792796	14.18 Volt	480 Pkt	58 Pcnt	65 Pcnt
1744792497	14.18 Volt	490 Pkt	58 Pcnt	65 Pcnt
1744792496	14.18 Volt	490 Pkt	58 Pcnt	65 Pcnt
1744792196	14.1 Volt	500 Pkt	57 Pcnt	65 Pcnt
1744791897	14.18 Volt	510 Pkt	58 Pcnt	65 Pcnt
1744791896	14.18 Volt	510 Pkt	58 Pcnt	65 Pcnt
1744791597	14.18 Volt	510 Pkt	57 Pcnt	65 Pcnt
1744791297	14.1 Volt	520 Pkt	57 Pcnt	65 Pcnt
1744791296	14.1 Volt	520 Pkt	57 Pcnt	65 Pcnt
1744790996	14.1 Volt	530 Pkt	56 Pcnt	65 Pcnt
1744790697	14.18 Volt	530 Pkt	55 Pcnt	65 Pcnt
1744790696	14.18 Volt	530 Pkt	55 Pcnt	65 Pcnt
1744790396	14.1 Volt	540 Pkt	55 Pcnt	65 Pcnt
1744790097	14.18 Volt	560 Pkt	56 Pcnt	65 Pcnt
1744790096	14.18 Volt	560 Pkt	56 Pcnt	65 Pcnt
1744789796	14.18 Volt	580 Pkt	56 Pcnt	65 Pcnt
1744789497	14.1 Volt	580 Pkt	56 Pcnt	65 Pcnt
1744789496	14.1 Volt	580 Pkt	56 Pcnt	65 Pcnt
1744789196	14.18 Volt	590 Pkt	57 Pcnt	65 Pcnt
1744788898	14.1 Volt	610 Pkt	59 Pcnt	65 Pcnt
1744788896	14.1 Volt	610 Pkt	59 Pcnt	65 Pcnt
1744788596	14.18 Volt	630 Pkt	60 Pcnt	65 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

DecEf: 0, 1, 0

Temp: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)