This is the latest recevied telemetry packets stored in our database for station/object BL7JV-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790661168 | 31.7 C | 0 | 0 | 0 | 0 |
| 1790660568 | 31.7 C | 0 | 0 | 0 | 0 |
| 1790659968 | 31.7 C | 0 | 0 | 0 | 0 |
| 1790659368 | 31.8 C | 0 | 0 | 0 | 0 |
| 1790658768 | 31.7 C | 0 | 0 | 0 | 0 |
| 1790658168 | 31.3 C | 0 | 0 | 0 | 0 |
| 1790657568 | 30.8 C | 0 | 0 | 0 | 0 |
| 1790656968 | 31 C | 0 | 0 | 0 | 0 |
| 1790656368 | 31.2 C | 0 | 0 | 0 | 0 |
| 1790655768 | 31.5 C | 0 | 0 | 0 | 0 |
| 1790655168 | 32 C | 0 | 0 | 0 | 0 |
| 1790654568 | 32.7 C | 0 | 0 | 0 | 0 |
| 1790653968 | 32.7 C | 0 | 0 | 0 | 0 |
| 1790653368 | 32.7 C | 0 | 0 | 0 | 0 |
| 1790652768 | 32.6 C | 0 | 0 | 0 | 0 |
| 1790652168 | 32.6 C | 0 | 0 | 0 | 0 |
| 1790651568 | 32.5 C | 0 | 0 | 0 | 0 |
| 1790650968 | 23.1 C | 0 | 0 | 0 | 0 |
| 1790650368 | 32.3 C | 0 | 0 | 0 | 0 |
| 1790649768 | 23.1 C | 0 | 0 | 0 | 0 |
| 1790649168 | 32 C | 0 | 0 | 0 | 0 |
| 1790648568 | 23.1 C | 0 | 0 | 0 | 0 |
| 1790647968 | 31.8 C | 0 | 0 | 0 | 0 |
| 1790647368 | 31.9 C | 0 | 0 | 0 | 0 |
| 1790646768 | 32 C | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 0.1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)