This is the latest recevied telemetry packets stored in our database for station/object EL-DL6MRA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794871643 | 2 RX Erlang | 35 TX Erlang | 1 RXcount/10m | 8 TXcount/10m | 0 none1 |
| 1794871043 | 0 RX Erlang | 221 TX Erlang | 0 RXcount/10m | 18 TXcount/10m | 0 none1 |
| 1794870443 | 3 RX Erlang | 293 TX Erlang | 2 RXcount/10m | 13 TXcount/10m | 0 none1 |
| 1794869843 | 0 RX Erlang | 703 TX Erlang | 0 RXcount/10m | 27 TXcount/10m | 0 none1 |
| 1794869243 | 0 RX Erlang | 801 TX Erlang | 0 RXcount/10m | 9 TXcount/10m | 0 none1 |
| 1794868643 | 0 RX Erlang | 967 TX Erlang | 0 RXcount/10m | 11 TXcount/10m | 0 none1 |
| 1794868043 | 0 RX Erlang | 918 TX Erlang | 0 RXcount/10m | 10 TXcount/10m | 0 none1 |
| 1794867443 | 0 RX Erlang | 943 TX Erlang | 0 RXcount/10m | 13 TXcount/10m | 0 none1 |
| 1794866843 | 0 RX Erlang | 941 TX Erlang | 0 RXcount/10m | 14 TXcount/10m | 0 none1 |
| 1794866243 | 0 RX Erlang | 933 TX Erlang | 0 RXcount/10m | 19 TXcount/10m | 0 none1 |
| 1794865643 | 0 RX Erlang | 793 TX Erlang | 0 RXcount/10m | 23 TXcount/10m | 0 none1 |
| 1794865043 | 0 RX Erlang | 970 TX Erlang | 0 RXcount/10m | 8 TXcount/10m | 0 none1 |
| 1794864443 | 0 RX Erlang | 960 TX Erlang | 0 RXcount/10m | 10 TXcount/10m | 0 none1 |
| 1794863843 | 0 RX Erlang | 125 TX Erlang | 0 RXcount/10m | 5 TXcount/10m | 0 none1 |
| 1794863243 | 0 RX Erlang | 20 TX Erlang | 0 RXcount/10m | 1 TXcount/10m | 0 none1 |
| 1794862643 | 0 RX Erlang | 10 TX Erlang | 0 RXcount/10m | 2 TXcount/10m | 0 none1 |
| 1794862043 | 0 RX Erlang | 71 TX Erlang | 0 RXcount/10m | 15 TXcount/10m | 0 none1 |
| 1794861443 | 0 RX Erlang | 280 TX Erlang | 0 RXcount/10m | 8 TXcount/10m | 0 none1 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)