This is the latest recevied telemetry packets stored in our database for station/object GW3ATZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786726472 | 437 Count | 972 Count | 333 Count | 4.22 VDC | 0.14 VDC |
| 1786724664 | 429 Count | 953 Count | 327 Count | 4.25 VDC | 0.14 VDC |
| 1786722855 | 421 Count | 937 Count | 321 Count | 4.21 VDC | 0.14 VDC |
| 1786721047 | 414 Count | 920 Count | 316 Count | 4.23 VDC | 0.14 VDC |
| 1786719239 | 406 Count | 901 Count | 310 Count | 4.24 VDC | 0.14 VDC |
| 1786717431 | 397 Count | 879 Count | 303 Count | 4.21 VDC | 0.14 VDC |
| 1786713908 | 381 Count | 845 Count | 291 Count | 4.26 VDC | 0.14 VDC |
| 1786712100 | 373 Count | 823 Count | 285 Count | 4.26 VDC | 0.14 VDC |
| 1786710292 | 364 Count | 804 Count | 278 Count | 4.25 VDC | 0.14 VDC |
| 1786708484 | 356 Count | 787 Count | 272 Count | 4.19 VDC | 0.14 VDC |
| 1786706676 | 348 Count | 770 Count | 266 Count | 4.21 VDC | 0.14 VDC |
| 1786704867 | 340 Count | 754 Count | 260 Count | 4.25 VDC | 0.14 VDC |
| 1786703058 | 333 Count | 736 Count | 255 Count | 4.26 VDC | 0.14 VDC |
| 1786701250 | 325 Count | 717 Count | 249 Count | 4.24 VDC | 0.14 VDC |
| 1786699442 | 316 Count | 700 Count | 242 Count | 4.24 VDC | 0.14 VDC |
| 1786697634 | 308 Count | 689 Count | 236 Count | 4.25 VDC | 0.14 VDC |
| 1786695826 | 299 Count | 670 Count | 229 Count | 4.2 VDC | 0.14 VDC |
| 1786694017 | 291 Count | 655 Count | 223 Count | 4.2 VDC | 0.14 VDC |
| 1786692307 | 282 Count | 640 Count | 216 Count | 4.23 VDC | 0.14 VDC |
| 1786690498 | 274 Count | 620 Count | 210 Count | 4.24 VDC | 0.14 VDC |
| 1786688690 | 265 Count | 601 Count | 203 Count | 4.22 VDC | 0.14 VDC |
| 1786686881 | 257 Count | 583 Count | 197 Count | 4.24 VDC | 0.14 VDC |
| 1786685073 | 248 Count | 560 Count | 190 Count | 4.26 VDC | 0.14 VDC |
| 1786683265 | 239 Count | 538 Count | 183 Count | 4.22 VDC | 0.14 VDC |
| 1786681457 | 230 Count | 519 Count | 176 Count | 4.25 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)