APRS Track Direct

My position About ☰

reset

TA5AQD-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA5AQD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1732438023	26 Pkt	0 Pkt	-76 dBm	12.02 V
1732437159	17 Pkt	1 Pkt	-77 dBm	12.02 V
1732436295	18 Pkt	2 Pkt	-77 dBm	12.02 V
1732435430	13 Pkt	0 Pkt	-78 dBm	12.02 V
1732434567	1 Pkt	0 Pkt	-77 dBm	12.02 V
1732433704	3 Pkt	3 Pkt	-77 dBm	12.02 V
1732432842	1 Pkt	0 Pkt	-77 dBm	12.02 V
1732431980	1 Pkt	1 Pkt	-77 dBm	12.02 V
1732431117	0 Pkt	2 Pkt	-77 dBm	12.02 V
1732430255	5 Pkt	1 Pkt	-78 dBm	12.02 V
1732429393	0 Pkt	0 Pkt	-78 dBm	12.02 V
1732428530	1 Pkt	1 Pkt	-78 dBm	12.02 V
1732427668	0 Pkt	2 Pkt	-77 dBm	12.02 V
1732426806	4 Pkt	0 Pkt	-77 dBm	12.02 V
1732425943	17 Pkt	2 Pkt	-77 dBm	12.02 V
1732425080	18 Pkt	1 Pkt	-77 dBm	12.02 V
1732424215	12 Pkt	0 Pkt	-77 dBm	12.02 V
1732423353	13 Pkt	2 Pkt	-76 dBm	12.02 V
1732422489	5 Pkt	0 Pkt	-77 dBm	12.02 V
1732421626	0 Pkt	2 Pkt	-77 dBm	12.02 V
1732420764	0 Pkt	0 Pkt	-77 dBm	12.02 V
1732419902	0 Pkt	1 Pkt	-77 dBm	12.02 V
1732419040	0 Pkt	2 Pkt	-78 dBm	12.02 V
1732418178	0 Pkt	0 Pkt	-77 dBm	12.02 V
1732417315	0 Pkt	2 Pkt	-77 dBm	12.02 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)