APRS Track Direct

My position About ☰

reset

INDIAN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object INDIAN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Rx10m*	Eff1h*	Temp*	Vin*
1731262391	610 Pkt	93 Pkt	79 Pcnt	42.1 F	13.13 Volt
1731262096	620 Pkt	100 Pkt	78 Pcnt	42.1 F	13.35 Volt
1731261791	620 Pkt	101 Pkt	78 Pcnt	42.1 F	13.13 Volt
1731261491	620 Pkt	88 Pkt	79 Pcnt	42.1 F	12.75 Volt
1731261191	620 Pkt	87 Pkt	79 Pcnt	42.1 F	12.75 Volt
1731260894	630 Pkt	83 Pkt	79 Pcnt	42.1 F	12.6 Volt
1731260591	640 Pkt	98 Pkt	78 Pcnt	42.1 F	12.53 Volt
1731260291	660 Pkt	108 Pkt	79 Pcnt	42.1 F	12.53 Volt
1731259991	650 Pkt	101 Pkt	80 Pcnt	42.1 F	12.45 Volt
1731259691	650 Pkt	107 Pkt	79 Pcnt	42.1 F	12.45 Volt
1731259391	640 Pkt	99 Pkt	78 Pcnt	42.1 F	12.45 Volt
1731259091	630 Pkt	105 Pkt	78 Pcnt	42.1 F	12.45 Volt
1731258795	630 Pkt	103 Pkt	79 Pcnt	42.1 F	12.45 Volt
1731258491	620 Pkt	99 Pkt	79 Pcnt	42.1 F	12.45 Volt
1731258191	620 Pkt	96 Pkt	78 Pcnt	42.1 F	12.45 Volt
1731257891	630 Pkt	110 Pkt	79 Pcnt	42.1 F	12.45 Volt
1731257591	620 Pkt	108 Pkt	79 Pcnt	42.1 F	12.45 Volt
1731256991	610 Pkt	106 Pkt	81 Pcnt	42.1 F	12.45 Volt
1731256691	590 Pkt	88 Pkt	81 Pcnt	42.1 F	12.45 Volt
1731256091	590 Pkt	98 Pkt	82 Pcnt	42.1 F	12.45 Volt
1731255491	590 Pkt	93 Pkt	82 Pcnt	42.1 F	12.45 Volt
1731255191	590 Pkt	92 Pkt	83 Pcnt	42.1 F	12.45 Volt
1731254900	580 Pkt	103 Pkt	82 Pcnt	42.1 F	12.45 Volt
1731254591	580 Pkt	104 Pkt	83 Pcnt	42.1 F	12.45 Volt
1731254291	580 Pkt	104 Pkt	82 Pcnt	42.1 F	12.45 Volt

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Rx10m: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0.9, -83

Vin: 0, 0.075, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)