This is the latest recevied telemetry packets stored in our database for station/object SANDOX-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1744862236 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1744861986 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1744861736 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1744861485 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1744861235 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1744860985 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1744860735 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1744860484 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1744860234 | 0 Pkt | 1 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1744859983 | 0 Pkt | 1 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1744859733 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1744859483 | 0 Pkt | 1 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1744859232 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1744858982 | 0 Pkt | 1 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1744858732 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1744858481 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1744858231 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1744857981 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1744857730 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1744857480 | 0 Pkt | 1 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1744857229 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1744856979 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1744856729 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1744856478 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1744856228 | 0 Pkt | 2 Pkt | 0 Pkt | -61 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)