This is the latest recevied telemetry packets stored in our database for station/object VE6AGD. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719426270 | 100 | 48 | 95 | 128 | 0 |
1719425310 | 100 | 48 | 95 | 128 | 0 |
1719424350 | 100 | 48 | 95 | 128 | 0 |
1719423450 | 100 | 48 | 95 | 128 | 0 |
1719422490 | 100 | 48 | 95 | 128 | 0 |
1719421590 | 100 | 48 | 95 | 128 | 0 |
1719420630 | 100 | 48 | 95 | 128 | 0 |
1719419730 | 100 | 48 | 95 | 128 | 0 |
1719418770 | 100 | 48 | 95 | 128 | 0 |
1719417870 | 100 | 48 | 95 | 128 | 0 |
1719416910 | 100 | 48 | 95 | 128 | 0 |
1719415950 | 100 | 48 | 95 | 128 | 0 |
1719415050 | 100 | 48 | 95 | 128 | 0 |
1719414090 | 100 | 48 | 95 | 128 | 0 |
1719413190 | 100 | 48 | 95 | 128 | 0 |
1719412230 | 100 | 48 | 95 | 128 | 0 |
1719411330 | 100 | 48 | 95 | 128 | 0 |
1719410370 | 100 | 48 | 95 | 128 | 0 |
1719409470 | 100 | 48 | 95 | 128 | 0 |
1719408510 | 100 | 48 | 95 | 128 | 0 |
1719407610 | 100 | 48 | 95 | 128 | 0 |
1719406650 | 100 | 48 | 95 | 128 | 0 |
1719405750 | 100 | 48 | 95 | 128 | 0 |
1719404850 | 100 | 48 | 95 | 128 | 0 |
1719403890 | 100 | 48 | 95 | 128 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)