This is the latest recevied telemetry packets stored in our database for station/object WX4FLY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1754208002 | 12.45 Volt | 0 Pkt | 0 Pkt | 50 Pcnt | 0 None |
| 1754207702 | 12.45 Volt | 0 Pkt | 0 Pkt | 50 Pcnt | 0 None |
| 1754207402 | 12.45 Volt | 0 Pkt | 0 Pkt | 50 Pcnt | 0 None |
| 1754207102 | 12.45 Volt | 0 Pkt | 0 Pkt | 54 Pcnt | 0 None |
| 1754206802 | 12.45 Volt | 0 Pkt | 0 Pkt | 50 Pcnt | 0 None |
| 1754206502 | 12.45 Volt | 0 Pkt | 0 Pkt | 46 Pcnt | 0 None |
| 1754206202 | 12.45 Volt | 0 Pkt | 0 Pkt | 46 Pcnt | 0 None |
| 1754205902 | 12.45 Volt | 0 Pkt | 0 Pkt | 50 Pcnt | 0 None |
| 1754205602 | 12.45 Volt | 0 Pkt | 0 Pkt | 46 Pcnt | 0 None |
| 1754205302 | 12.45 Volt | 0 Pkt | 0 Pkt | 42 Pcnt | 0 None |
| 1754205002 | 12.45 Volt | 0 Pkt | 0 Pkt | 50 Pcnt | 0 None |
| 1754204702 | 12.45 Volt | 0 Pkt | 0 Pkt | 54 Pcnt | 0 None |
| 1754204402 | 12.45 Volt | 0 Pkt | 0 Pkt | 54 Pcnt | 0 None |
| 1754204102 | 12.45 Volt | 0 Pkt | 0 Pkt | 54 Pcnt | 0 None |
| 1754203802 | 12.45 Volt | 0 Pkt | 0 Pkt | 58 Pcnt | 0 None |
| 1754203502 | 12.45 Volt | 0 Pkt | 0 Pkt | 58 Pcnt | 0 None |
| 1754203202 | 12.45 Volt | 0 Pkt | 0 Pkt | 63 Pcnt | 0 None |
| 1754202902 | 12.45 Volt | 0 Pkt | 0 Pkt | 70 Pcnt | 0 None |
| 1754202602 | 12.45 Volt | 0 Pkt | 0 Pkt | 63 Pcnt | 0 None |
| 1754202302 | 12.45 Volt | 0 Pkt | 0 Pkt | 63 Pcnt | 0 None |
| 1754202002 | 12.45 Volt | 0 Pkt | 0 Pkt | 63 Pcnt | 0 None |
| 1754201702 | 12.45 Volt | 0 Pkt | 0 Pkt | 70 Pcnt | 0 None |
| 1754201402 | 12.45 Volt | 0 Pkt | 0 Pkt | 63 Pcnt | 0 None |
| 1754201102 | 12.45 Volt | 0 Pkt | 0 Pkt | 70 Pcnt | 0 None |
| 1754200802 | 12.45 Volt | 0 Pkt | 0 Pkt | 70 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 1, 0
Dg1h: 0, 1, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)