This is the latest recevied telemetry packets stored in our database for station/object YC1SNI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Voltage* | Current* | Value5* |
|---|---|---|---|---|---|
| 1782516015 | 28 °C | 63 %RH | 2 V | 111 mA | 0 |
| 1782514260 | 28 °C | 63 %RH | 3 V | 113 mA | 0 |
| 1782512504 | 28 °C | 62 %RH | 3 V | 119 mA | 0 |
| 1782510750 | 29 °C | 61 %RH | 3 V | 109 mA | 0 |
| 1782508994 | 29 °C | 61 %RH | 3 V | 110 mA | 0 |
| 1782507239 | 29 °C | 60 %RH | 3 V | 111 mA | 0 |
| 1782505484 | 29 °C | 59 %RH | 3 V | 111 mA | 0 |
| 1782503729 | 29 °C | 59 %RH | 3 V | 111 mA | 0 |
| 1782501974 | 29 °C | 57 %RH | 3 V | 108 mA | 0 |
| 1782500219 | 29 °C | 58 %RH | 3 V | 124 mA | 0 |
| 1782498464 | 29 °C | 55 %RH | 3 V | 124 mA | 0 |
| 1782496709 | 29 °C | 54 %RH | 3 V | 124 mA | 0 |
| 1782494954 | 29 °C | 55 %RH | 3 V | 127 mA | 0 |
| 1782493199 | 29 °C | 57 %RH | 3 V | 124 mA | 0 |
| 1782491444 | 29 °C | 59 %RH | 3 V | 123 mA | 0 |
| 1782489689 | 29 °C | 57 %RH | 3 V | 113 mA | 0 |
| 1782487934 | 29 °C | 57 %RH | 3 V | 111 mA | 0 |
| 1782486179 | 29 °C | 54 %RH | 4 V | 108 mA | 0 |
| 1782484424 | 29 °C | 53 %RH | 4 V | 123 mA | 0 |
| 1782482669 | 27 °C | 53 %RH | 4 V | 0 mA | 0 |
| 1782480914 | 28 °C | 55 %RH | 4 V | 0 mA | 0 |
| 1782479159 | 28 °C | 57 %RH | 4 V | 0 mA | 0 |
| 1782479145 | 28 °C | 57 %RH | 4 V | 0 mA | 0 |
| 1782478141 | 28 °C | 57 %RH | 3 V | 0 mA | 0 |
| 1782476386 | 29 °C | 60 %RH | 3 V | 0 mA | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Voltage: 0, 1, 0
Current: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)