This is the latest recevied telemetry packets stored in our database for station/object OH7FQP. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Rx1h* | Rx10m* | Eff1h* | Eff* | A5* |
---|---|---|---|---|---|
1719663552 | 0 Pkt | 0 Pkt | 0 Pcnt | 74 Pcnt | 0 None |
1719661750 | 0 Pkt | 0 Pkt | 100 Pcnt | 74 Pcnt | 0 None |
1719659948 | 10 Pkt | 1 Pkt | 76 Pcnt | 74 Pcnt | 0 None |
1719658147 | 0 Pkt | 2 Pkt | 69 Pcnt | 73 Pcnt | 0 None |
1719656345 | 0 Pkt | 1 Pkt | 57 Pcnt | 74 Pcnt | 0 None |
1719654543 | 0 Pkt | 1 Pkt | 71 Pcnt | 74 Pcnt | 0 None |
1719652741 | 0 Pkt | 0 Pkt | 100 Pcnt | 74 Pcnt | 0 None |
1719650940 | 0 Pkt | 2 Pkt | 71 Pcnt | 74 Pcnt | 0 None |
1719649138 | 0 Pkt | 1 Pkt | 66 Pcnt | 74 Pcnt | 0 None |
1719647336 | 0 Pkt | 0 Pkt | 100 Pcnt | 74 Pcnt | 0 None |
1719645534 | 0 Pkt | 0 Pkt | 66 Pcnt | 74 Pcnt | 0 None |
1719643732 | 0 Pkt | 0 Pkt | 66 Pcnt | 74 Pcnt | 0 None |
1719641931 | 0 Pkt | 0 Pkt | 60 Pcnt | 74 Pcnt | 0 None |
1719640129 | 0 Pkt | 1 Pkt | 71 Pcnt | 74 Pcnt | 0 None |
1719638327 | 0 Pkt | 1 Pkt | 100 Pcnt | 74 Pcnt | 0 None |
1719636525 | 0 Pkt | 0 Pkt | 80 Pcnt | 74 Pcnt | 0 None |
1719634724 | 0 Pkt | 0 Pkt | 75 Pcnt | 74 Pcnt | 0 None |
1719632922 | 0 Pkt | 0 Pkt | 83 Pcnt | 74 Pcnt | 0 None |
1719631120 | 0 Pkt | 0 Pkt | 85 Pcnt | 74 Pcnt | 0 None |
1719629318 | 0 Pkt | 0 Pkt | 83 Pcnt | 74 Pcnt | 0 None |
1719627517 | 0 Pkt | 0 Pkt | 100 Pcnt | 74 Pcnt | 0 None |
1719625715 | 0 Pkt | 1 Pkt | 100 Pcnt | 73 Pcnt | 0 None |
1719623913 | 10 Pkt | 0 Pkt | 100 Pcnt | 73 Pcnt | 0 None |
*Used Equation Coefficients:
Rx1h: 0, 10, 0
Rx10m: 0, 1, 0
Eff1h: 0, 1, 0
Eff: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)