This is the latest recevied telemetry packets stored in our database for station/object IR2ZZW-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1744264063 | 180 | 22 | 7 | 81 | 3 |
| 1744263764 | 180 | 18 | 6 | 80 | 2 |
| 1744263464 | 180 | 12 | 6 | 81 | 1 |
| 1744263164 | 180 | 7 | 6 | 82 | 2 |
| 1744262863 | 180 | 11 | 6 | 83 | 2 |
| 1744262564 | 180 | 10 | 6 | 81 | 1 |
| 1744262263 | 180 | 4 | 6 | 80 | 1 |
| 1744261964 | 180 | 12 | 6 | 82 | 2 |
| 1744261664 | 180 | 13 | 6 | 84 | 2 |
| 1744261364 | 180 | 7 | 6 | 85 | 2 |
| 1744261064 | 180 | 12 | 6 | 85 | 2 |
| 1744260764 | 180 | 10 | 6 | 82 | 1 |
| 1744260464 | 180 | 5 | 6 | 82 | 2 |
| 1744260164 | 180 | 12 | 6 | 83 | 2 |
| 1744259864 | 180 | 12 | 6 | 84 | 2 |
| 1744259564 | 180 | 8 | 6 | 83 | 2 |
| 1744259264 | 180 | 13 | 6 | 85 | 2 |
| 1744258964 | 180 | 10 | 6 | 85 | 2 |
| 1744258664 | 180 | 5 | 6 | 83 | 2 |
| 1744258364 | 180 | 11 | 6 | 83 | 2 |
| 1744258064 | 180 | 13 | 6 | 82 | 2 |
| 1744257764 | 180 | 8 | 7 | 81 | 2 |
| 1744257464 | 180 | 9 | 7 | 80 | 2 |
| 1744257164 | 180 | 14 | 8 | 84 | 2 |
| 1744256864 | 180 | 8 | 8 | 82 | 3 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)