This is the latest recevied telemetry packets stored in our database for station/object HS8AC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | VBAT* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782574946 | 25.87 °C | 0 %RH | 4.2 V | 0 | 0 |
| 1782574346 | 25.89 °C | 0 %RH | 4.2 V | 0 | 0 |
| 1782573746 | 26 °C | 0 %RH | 4.2 V | 0 | 0 |
| 1782573146 | 25.9 °C | 0 %RH | 4.21 V | 0 | 0 |
| 1782572546 | 25.78 °C | 0 %RH | 4.2 V | 0 | 0 |
| 1782571946 | 25.84 °C | 0 %RH | 4.2 V | 0 | 0 |
| 1782570824 | 25.99 °C | 100 %RH | 4.21 V | 0 | 0 |
| 1782570224 | 26.04 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1782569626 | 26.01 °C | 0 %RH | 4.21 V | 0 | 0 |
| 1782569024 | 25.91 °C | 100 %RH | 4.21 V | 0 | 0 |
| 1782568424 | 26.2 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1782567824 | 26.16 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1782567224 | 26.26 °C | 100 %RH | 4.21 V | 0 | 0 |
| 1782566624 | 26.41 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1782566024 | 26.57 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1782565424 | 26.44 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1782564824 | 26.3 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1782564224 | 26.4 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1782563624 | 26.4 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1782563024 | 26.26 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1782562424 | 26.53 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1782561824 | 26.55 °C | 100 %RH | 4.21 V | 0 | 0 |
| 1782561224 | 26.65 °C | 100 %RH | 4.21 V | 0 | 0 |
| 1782560624 | 26.86 °C | 100 %RH | 4.21 V | 0 | 0 |
| 1782560024 | 26.87 °C | 100 %RH | 4.21 V | 0 | 0 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
VBAT: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)