APRS Track Direct

My position About ☰

reset

YH0DVA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YH0DVA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1744866608	21 Pkt	0 Pkt	31 dBm	10.79 V
1744866285	13 Pkt	0 Pkt	31 dBm	13.1 V
1744865962	14 Pkt	0 Pkt	31 dBm	13.1 V
1744865638	21 Pkt	0 Pkt	31 dBm	13.08 V
1744865314	15 Pkt	0 Pkt	31 dBm	13.08 V
1744864990	16 Pkt	0 Pkt	31 dBm	13.1 V
1744864667	20 Pkt	1 Pkt	31 dBm	13.08 V
1744864343	20 Pkt	0 Pkt	31 dBm	13.1 V
1744864020	25 Pkt	1 Pkt	31 dBm	13.1 V
1744863696	13 Pkt	0 Pkt	31 dBm	13.1 V
1744863373	17 Pkt	0 Pkt	31 dBm	13.1 V
1744863050	20 Pkt	1 Pkt	31 dBm	13.1 V
1744862727	24 Pkt	0 Pkt	31 dBm	13.1 V
1744862403	18 Pkt	0 Pkt	31 dBm	13.1 V
1744862079	26 Pkt	0 Pkt	31 dBm	13.1 V
1744861755	17 Pkt	0 Pkt	31 dBm	13.1 V
1744861432	18 Pkt	0 Pkt	31 dBm	13.08 V
1744861109	21 Pkt	0 Pkt	31 dBm	13.1 V
1744860785	13 Pkt	0 Pkt	31 dBm	13.1 V
1744860462	14 Pkt	0 Pkt	31 dBm	13.13 V
1744860139	19 Pkt	0 Pkt	31 dBm	13.08 V
1744859815	19 Pkt	0 Pkt	31 dBm	10.91 V
1744859491	11 Pkt	0 Pkt	31 dBm	13.1 V
1744859168	20 Pkt	0 Pkt	31 dBm	13.13 V
1744858845	14 Pkt	0 Pkt	31 dBm	13.1 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)