APRS Track Direct

My position About ☰

reset

IW2HUZ-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IW2HUZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx10 m*	Rx1h*	Eff1h*	Dg1h*
1758233065	13.05 Volt	18 Pkt	110 Pkt	75 Pcnt	20 Pkt
1758232765	12.98 Volt	13 Pkt	120 Pkt	75 Pcnt	20 Pkt
1758232465	13.2 Volt	14 Pkt	120 Pkt	74 Pcnt	20 Pkt
1758232165	12.98 Volt	18 Pkt	120 Pkt	75 Pcnt	20 Pkt
1758231865	13.43 Volt	15 Pkt	120 Pkt	75 Pcnt	20 Pkt
1758231565	13.13 Volt	21 Pkt	130 Pkt	76 Pcnt	20 Pkt
1758231265	13.5 Volt	33 Pkt	120 Pkt	77 Pcnt	20 Pkt
1758230965	13.5 Volt	22 Pkt	120 Pkt	76 Pcnt	20 Pkt
1758230665	12.98 Volt	15 Pkt	110 Pkt	72 Pcnt	20 Pkt
1758230365	13.28 Volt	20 Pkt	110 Pkt	72 Pcnt	20 Pkt
1758230065	13.43 Volt	13 Pkt	110 Pkt	71 Pcnt	20 Pkt
1758229765	13.28 Volt	24 Pkt	120 Pkt	71 Pcnt	20 Pkt
1758229465	13.43 Volt	20 Pkt	110 Pkt	72 Pcnt	20 Pkt
1758229165	13.35 Volt	14 Pkt	110 Pkt	72 Pcnt	20 Pkt
1758228865	12.98 Volt	13 Pkt	110 Pkt	72 Pcnt	20 Pkt
1758228565	13.05 Volt	25 Pkt	110 Pkt	71 Pcnt	20 Pkt
1758228265	13.5 Volt	21 Pkt	110 Pkt	72 Pcnt	20 Pkt
1758227965	13.28 Volt	20 Pkt	110 Pkt	71 Pcnt	20 Pkt
1758227665	13.5 Volt	18 Pkt	110 Pkt	71 Pcnt	20 Pkt
1758227365	12.98 Volt	15 Pkt	110 Pkt	70 Pcnt	20 Pkt
1758227065	12.98 Volt	19 Pkt	110 Pkt	70 Pcnt	20 Pkt
1758226766	13.2 Volt	20 Pkt	100 Pkt	70 Pcnt	20 Pkt
1758226466	13.5 Volt	14 Pkt	100 Pkt	70 Pcnt	20 Pkt
1758226166	13.28 Volt	15 Pkt	110 Pkt	72 Pcnt	20 Pkt
1758225866	13.58 Volt	18 Pkt	110 Pkt	72 Pcnt	20 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx10 m: 0, 1, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

Dg1h: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)