This is the latest recevied telemetry packets stored in our database for station/object SV3SMG-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782488966 | 3.79 | 0 | 0 | 0 | 0 |
| 1782488942 | 3.79 | 0 | 0 | 0 | 0 |
| 1782488887 | 3.79 | 0 | 0 | 0 | 0 |
| 1782488863 | 3.79 | 0 | 0 | 0 | 0 |
| 1782488582 | 3.79 | 0 | 0 | 0 | 0 |
| 1782487678 | 3.81 | 0 | 0 | 0 | 0 |
| 1782486775 | 3.85 | 0 | 0 | 0 | 0 |
| 1782485871 | 3.86 | 0 | 0 | 0 | 0 |
| 1782484968 | 3.88 | 0 | 0 | 0 | 0 |
| 1782484064 | 3.89 | 0 | 0 | 0 | 0 |
| 1782483137 | 3.91 | 0 | 0 | 0 | 0 |
| 1782483113 | 3.91 | 0 | 0 | 0 | 0 |
| 1782483036 | 3.91 | 0 | 0 | 0 | 0 |
| 1782483012 | 3.91 | 0 | 0 | 0 | 0 |
| 1782482760 | 3.92 | 0 | 0 | 0 | 0 |
| 1782482641 | 3.92 | 0 | 0 | 0 | 0 |
| 1782482520 | 3.93 | 0 | 0 | 0 | 0 |
| 1782482481 | 3.92 | 0 | 0 | 0 | 0 |
| 1782481892 | 3.95 | 0 | 0 | 0 | 0 |
| 1782480989 | 3.98 | 0 | 0 | 0 | 0 |
| 1782480085 | 4 | 0 | 0 | 0 | 0 |
| 1782455140 | 3.92 | 0 | 0 | 0 | 0 |
| 1782453969 | 3.96 | 0 | 0 | 0 | 0 |
| 1782453925 | 3.97 | 0 | 0 | 0 | 0 |
| 1782453902 | 3.96 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)