This is the latest recevied telemetry packets stored in our database for station/object SP5BWN-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782492093 | 28 Count | 153 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782490290 | 27 Count | 152 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782488487 | 26 Count | 147 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782486684 | 25 Count | 137 Count | 0 Count | 4.06 VDC | 0.14 VDC |
| 1782484881 | 24 Count | 128 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782483078 | 23 Count | 119 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782481275 | 22 Count | 109 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782479472 | 20 Count | 102 Count | 0 Count | 4.01 VDC | 0.14 VDC |
| 1782477670 | 19 Count | 92 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782475867 | 16 Count | 83 Count | 0 Count | 4.01 VDC | 0.14 VDC |
| 1782474064 | 15 Count | 73 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782472401 | 14 Count | 64 Count | 0 Count | 4.05 VDC | 0.14 VDC |
| 1782470597 | 13 Count | 55 Count | 0 Count | 4.01 VDC | 0.14 VDC |
| 1782468794 | 12 Count | 45 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782466991 | 11 Count | 35 Count | 0 Count | 4.01 VDC | 0.14 VDC |
| 1782465189 | 9 Count | 26 Count | 0 Count | 4.01 VDC | 0.14 VDC |
| 1782463386 | 8 Count | 16 Count | 0 Count | 4.02 VDC | 0.14 VDC |
| 1782461583 | 7 Count | 9 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782459780 | 5 Count | 6 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782457977 | 3 Count | 5 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782456174 | 2 Count | 5 Count | 0 Count | 4.06 VDC | 0.14 VDC |
| 1782454371 | 1 Count | 5 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782452568 | 668 Count | 1035 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782450765 | 658 Count | 992 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1782448962 | 653 Count | 860 Count | 0 Count | 4 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)