APRS Track Direct

My position About ☰

reset

WC4PEM-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1732194104	26 C	14.33 Volt	340 Pkt	1310 Pkt	67 Pcnt
1732193805	27 C	14.25 Volt	350 Pkt	1360 Pkt	68 Pcnt
1732193804	27 C	14.25 Volt	350 Pkt	1360 Pkt	68 Pcnt
1732193504	27 C	14.33 Volt	360 Pkt	1370 Pkt	68 Pcnt
1732193206	26 C	14.33 Volt	360 Pkt	1390 Pkt	69 Pcnt
1732193204	26 C	14.33 Volt	360 Pkt	1390 Pkt	69 Pcnt
1732192904	26.5 C	14.33 Volt	370 Pkt	1410 Pkt	70 Pcnt
1732192604	27 C	14.03 Volt	370 Pkt	1400 Pkt	70 Pcnt
1732192604	27 C	14.03 Volt	370 Pkt	1400 Pkt	70 Pcnt
1732192304	26 C	14.33 Volt	350 Pkt	1380 Pkt	70 Pcnt
1732192084	26.5 C	14.33 Volt	330 Pkt	1380 Pkt	71 Pcnt
1732192007	26 C	14.33 Volt	330 Pkt	1370 Pkt	70 Pcnt
1732192004	26 C	14.33 Volt	330 Pkt	1370 Pkt	70 Pcnt
1732191704	27 C	14.18 Volt	330 Pkt	1370 Pkt	71 Pcnt
1732191531	26.5 C	14.25 Volt	310 Pkt	1390 Pkt	73 Pcnt
1732191406	26.5 C	14.33 Volt	330 Pkt	1380 Pkt	71 Pcnt
1732191404	26.5 C	14.33 Volt	330 Pkt	1380 Pkt	71 Pcnt
1732191104	26 C	14.33 Volt	320 Pkt	1390 Pkt	72 Pcnt
1732190804	26.5 C	14.25 Volt	310 Pkt	1390 Pkt	73 Pcnt
1732190804	26.5 C	14.25 Volt	310 Pkt	1390 Pkt	73 Pcnt
1732190504	27 C	14.33 Volt	310 Pkt	1380 Pkt	73 Pcnt
1732190453	27 C	14.33 Volt	290 Pkt	1340 Pkt	73 Pcnt
1732190204	25.5 C	14.33 Volt	290 Pkt	1350 Pkt	72 Pcnt
1732190204	25.5 C	14.33 Volt	290 Pkt	1350 Pkt	72 Pcnt
1732189904	26.5 C	13.95 Volt	290 Pkt	1360 Pkt	73 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)