APRS Track Direct

My position About ☰

reset

SR9NSK-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9NSK-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10min*	Tx10min*	Digi10min*	Tempre*
1732288151	103 Pkt	2 Pkt	0 Pkt	21.5 DegC
1732287551	108 Pkt	3 Pkt	0 Pkt	21.5 DegC
1732286949	119 Pkt	2 Pkt	0 Pkt	21.5 DegC
1732286349	122 Pkt	4 Pkt	1 Pkt	21.5 DegC
1732285747	107 Pkt	5 Pkt	4 Pkt	21.5 DegC
1732285147	105 Pkt	6 Pkt	2 Pkt	21.5 DegC
1732284543	75 Pkt	9 Pkt	3 Pkt	21.5 DegC
1732283933	105 Pkt	4 Pkt	1 Pkt	21 DegC
1732283332	92 Pkt	2 Pkt	0 Pkt	21 DegC
1732282732	131 Pkt	3 Pkt	0 Pkt	21 DegC
1732282130	112 Pkt	3 Pkt	0 Pkt	21 DegC
1732281530	113 Pkt	3 Pkt	0 Pkt	21 DegC
1732280928	114 Pkt	2 Pkt	0 Pkt	21 DegC
1732280328	72 Pkt	3 Pkt	0 Pkt	21 DegC
1732279726	124 Pkt	2 Pkt	0 Pkt	21 DegC
1732279126	107 Pkt	3 Pkt	0 Pkt	21 DegC
1732278524	118 Pkt	3 Pkt	0 Pkt	20.5 DegC
1732277922	94 Pkt	3 Pkt	0 Pkt	20.5 DegC
1732277319	91 Pkt	2 Pkt	0 Pkt	20.5 DegC
1732276719	100 Pkt	3 Pkt	0 Pkt	20.5 DegC
1732276117	97 Pkt	2 Pkt	0 Pkt	20 DegC
1732275518	64 Pkt	8 Pkt	0 Pkt	20 DegC
1732274906	110 Pkt	2 Pkt	0 Pkt	19.5 DegC
1732274307	110 Pkt	3 Pkt	0 Pkt	19.5 DegC
1732273705	90 Pkt	2 Pkt	0 Pkt	19.5 DegC

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Tx10min: 0, 1, 0

Digi10min: 0, 1, 0

HostTx10m: 0, 1, 0

Tempre: 0, 0.5, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)