This is the latest recevied telemetry packets stored in our database for station/object OE3BCB-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Radiation* | Radiation* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719426806 | 20 CPM | 84 nSv/h | 0 | 0 | 0 |
1719426506 | 16 CPM | 70 nSv/h | 0 | 0 | 0 |
1719426206 | 12 CPM | 42 nSv/h | 0 | 0 | 0 |
1719425906 | 12 CPM | 56 nSv/h | 0 | 0 | 0 |
1719425605 | 24 CPM | 112 nSv/h | 0 | 0 | 0 |
1719425305 | 20 CPM | 98 nSv/h | 0 | 0 | 0 |
1719425005 | 20 CPM | 84 nSv/h | 0 | 0 | 0 |
1719424705 | 20 CPM | 98 nSv/h | 0 | 0 | 0 |
1719424405 | 16 CPM | 84 nSv/h | 0 | 0 | 0 |
1719424105 | 20 CPM | 84 nSv/h | 0 | 0 | 0 |
1719423805 | 20 CPM | 84 nSv/h | 0 | 0 | 0 |
1719423505 | 20 CPM | 84 nSv/h | 0 | 0 | 0 |
1719423205 | 16 CPM | 70 nSv/h | 0 | 0 | 0 |
1719422905 | 16 CPM | 70 nSv/h | 0 | 0 | 0 |
1719422604 | 20 CPM | 98 nSv/h | 0 | 0 | 0 |
1719422305 | 12 CPM | 56 nSv/h | 0 | 0 | 0 |
1719422005 | 16 CPM | 84 nSv/h | 0 | 0 | 0 |
1719421704 | 20 CPM | 84 nSv/h | 0 | 0 | 0 |
1719421404 | 16 CPM | 70 nSv/h | 0 | 0 | 0 |
1719421104 | 24 CPM | 112 nSv/h | 0 | 0 | 0 |
1719420804 | 20 CPM | 84 nSv/h | 0 | 0 | 0 |
1719420503 | 28 CPM | 126 nSv/h | 0 | 0 | 0 |
1719420204 | 24 CPM | 98 nSv/h | 0 | 0 | 0 |
1719419903 | 24 CPM | 112 nSv/h | 0 | 0 | 0 |
1719419603 | 12 CPM | 42 nSv/h | 0 | 0 | 0 |
*Used Equation Coefficients:
Radiation: 0, 4, 0
Radiation: 0, 14, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)