APRS Track Direct

My position About ☰

reset

SP8QEO-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP8QEO-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732286891	13.88 Volt	150 Pkt	0 Pkt	59 Pcnt
1732286891	13.88 Volt	150 Pkt	0 Pkt	59 Pcnt
1732286591	13.05 Volt	150 Pkt	0 Pkt	60 Pcnt
1732286291	13.65 Volt	150 Pkt	0 Pkt	61 Pcnt
1732286291	13.65 Volt	150 Pkt	0 Pkt	61 Pcnt
1732285991	13.13 Volt	140 Pkt	0 Pkt	62 Pcnt
1732285691	13.5 Volt	150 Pkt	0 Pkt	64 Pcnt
1732285691	13.5 Volt	150 Pkt	0 Pkt	64 Pcnt
1732285391	13.43 Volt	160 Pkt	0 Pkt	66 Pcnt
1732285091	13.35 Volt	160 Pkt	10 Pkt	67 Pcnt
1732285091	13.35 Volt	160 Pkt	10 Pkt	67 Pcnt
1732284791	13.2 Volt	160 Pkt	10 Pkt	69 Pcnt
1732284491	13.5 Volt	140 Pkt	10 Pkt	67 Pcnt
1732284491	13.5 Volt	140 Pkt	10 Pkt	67 Pcnt
1732284191	13.28 Volt	150 Pkt	10 Pkt	69 Pcnt
1732283892	13.58 Volt	140 Pkt	10 Pkt	70 Pcnt
1732283891	13.58 Volt	140 Pkt	10 Pkt	70 Pcnt
1732283591	13.28 Volt	150 Pkt	10 Pkt	73 Pcnt
1732283291	13.58 Volt	150 Pkt	10 Pkt	72 Pcnt
1732283291	13.58 Volt	150 Pkt	10 Pkt	72 Pcnt
1732282991	13.35 Volt	150 Pkt	10 Pkt	71 Pcnt
1732282691	13.43 Volt	140 Pkt	10 Pkt	69 Pcnt
1732282691	13.43 Volt	140 Pkt	10 Pkt	69 Pcnt
1732282391	13.5 Volt	140 Pkt	10 Pkt	70 Pcnt
1732282091	13.35 Volt	130 Pkt	10 Pkt	68 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)