APRS Track Direct

My position About ☰

reset

IU4BUQ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU4BUQ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1744688901	13.43 Volt	570 Pkt	160 Pkt	62 Pcnt	17 C
1744688899	13.43 Volt	570 Pkt	160 Pkt	62 Pcnt	17 C
1744688599	13.43 Volt	580 Pkt	160 Pkt	61 Pcnt	17 C
1744688301	13.43 Volt	580 Pkt	170 Pkt	61 Pcnt	17 C
1744687999	13.43 Volt	580 Pkt	160 Pkt	61 Pcnt	17 C
1744687700	13.43 Volt	600 Pkt	170 Pkt	62 Pcnt	17 C
1744687699	13.43 Volt	600 Pkt	170 Pkt	62 Pcnt	17 C
1744687399	13.43 Volt	590 Pkt	170 Pkt	63 Pcnt	17 C
1744687100	13.43 Volt	580 Pkt	160 Pkt	62 Pcnt	17 C
1744687099	13.43 Volt	580 Pkt	160 Pkt	62 Pcnt	17 C
1744686500	13.43 Volt	570 Pkt	160 Pkt	62 Pcnt	17 C
1744686499	13.43 Volt	570 Pkt	160 Pkt	62 Pcnt	17 C
1744686199	13.43 Volt	570 Pkt	160 Pkt	62 Pcnt	17 C
1744685900	13.43 Volt	570 Pkt	170 Pkt	62 Pcnt	17 C
1744685899	13.43 Volt	570 Pkt	170 Pkt	62 Pcnt	17 C
1744685599	13.43 Volt	590 Pkt	170 Pkt	62 Pcnt	17 C
1744685300	13.43 Volt	600 Pkt	170 Pkt	63 Pcnt	17 C
1744685299	13.43 Volt	600 Pkt	170 Pkt	63 Pcnt	17 C
1744684999	13.43 Volt	610 Pkt	180 Pkt	64 Pcnt	17 C
1744684701	13.43 Volt	610 Pkt	180 Pkt	64 Pcnt	17 C
1744684699	13.43 Volt	610 Pkt	180 Pkt	64 Pcnt	17 C
1744684399	13.43 Volt	610 Pkt	180 Pkt	64 Pcnt	17 C
1744684100	13.43 Volt	620 Pkt	180 Pkt	63 Pcnt	17 C
1744684099	13.43 Volt	620 Pkt	180 Pkt	63 Pcnt	17 C
1744683799	13.43 Volt	640 Pkt	180 Pkt	63 Pcnt	17 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)